Search results
-
Wheel Spacers with NO level/lift
Make sure the wheel spacers are hubcentric, meaning they have the lip on them and remove the factory flat tabs off the hub assembly around the factory studs before you mount them. Bora and Spidertrax are the best out there. And they won’t wear on wheel bearing so long as they are Hubcentric. If...- MoPowered
- Post #8
- Forum: General Discussions
-
To ceramic coat or not?
I can only add that for true paint correction and ceramic coating 1,400 is not a bad price. You neeed to understand that ceramic and graphene’s do a lot for paint protection but are not the do all end all of vehicle maintenance. If you’re looking for high gloss, protection and ease of use at a... -
Who has experience with the 4Runner?
Well well, look what the 4Runner dragged in!! LOL! What's up Mo'? Long time no "see". Hope you and the family are all good? Heya my fellow, OCNY, things are good thanks for asking, how goes everything with you. I pop in to check on posts every once and again. But seeing as how I'm in between...- MoPowered
- Post #21
- Forum: Other Vehicle Discussion
-
Who has experience with the 4Runner?
Not many of the member’s here know this but I purchased a 2019 4 Runner TRD Off Road Premium. I can tell you this you won’t be disappointed at all. I pull over 19mpgks with my lift and 33’s. It doesn’t have a peppy pick-up compared to our 14 Limited GC, but that’s because it’s a 5 speed auto not...- MoPowered
- Post #19
- Forum: Other Vehicle Discussion
-
-
Tire question
Not to Hijack the thread but it was a 1970 Twilight Blue Metallic, 455cid punched out .30 over, full cam all roller, high rise Edelbrock manifold, Holley 780cfm carb, billet steel flywheel, Center Force dual friction clutch, M-22 straight cut Rock crusher trans 4:10, 12 bolt posi, tire smashing... -
Tire question
I always look at the Brands I like, Cooper, Bridgestone, Mickey Thompson, Dick Cepek, Good Year etc...,then I think about tread wear, snow, rain, looks and price. Then I throw a quarter in the air and when it comes down if I don’t like it I throw it up in the air again, lol. And I personally... -
Tire question
I can only say this so far as best tires for you and your vehicle, that’s as subjective as to what’s the best beer, best chips, best frozen pizza etc....I’ve had so many brands on so many different vehicles and I can only think that some of the best performing tires on whichever vehicle they... -
Tire question
Well FYI, Cooper bought them and Dick Cepek and from what I read Good year owns them all now, lol. I’ve always like Mickey Thompson as he made his living off road and practiced what he preached. -
Tire question
I always liked Mickey Thompson tires, Andy ran them on several Wrangler's and my 99 2500.Loved them but the got to be real costly so I switched out to some other brands. Duratracs, MTR’s Hercules Terra Tracy TrailDiggers, and Trxus MTR’s. When I saw these where on sale I went right back to them... -
Tire question
I just bought a set of Mickey Thompson Deegan 38’s that are an A/T check them also. -
Tire question
Yeah the AT3 is a good tire and they have a newer slightly more aggressive AT3 XLT that has some serious siping in it it should do well in rain and snow. -
Considering a PW
Lol, why do people think that the Power Wagon’s have “trouble” pulling a load? It’s still a 2500 Heavy Duty full frame truck. Sure payload and tow rating is lower than other in class trucks and some 1500’s properly equipped will tow as much or more on ratings. But let’s call this bullshit when...- MoPowered
- Post #6
- Forum: Dodge Ram Power Wagon
-
Interested in PW
Effectively your pushing those 37’s with about a 3.55 gear ratio from the factory 4.10’s. Give or take a few depending on true tire diameter at inflation rates wheel widths and tread wear. All those come into play and the only thing that won’t come into play is wheel diameter because a 37” inch...- MoPowered
- Post #58
- Forum: Dodge Ram Power Wagon
-
Interested in PW
My 12 is 5.7, without mds of course so no lifter issue after 72k+ miles. 6 speed trans and no issues there either. I’ll keep mine over the newer 6.4 due to them dropping the gearing to 4:10. My 4.56’s turn the 37’s easily and the ride is like a 67’ Caddy. Lol, almost. So far as the having to to...- MoPowered
- Post #49
- Forum: Dodge Ram Power Wagon
-
From Ram to Ridgeline, back to Ram!
Lol, just couldn’t bring yourself o let it go. Well anyway even if you did you be like a one legged man in ass kickin’ Contest trying to justify it.- MoPowered
- Post #24
- Forum: Introduction
-
From Ram to Ridgeline, back to Ram!
Broke my back when I was 15, tailbone is at 90 degree’s got a 40 percent nerve drop in my left leg and I have a nice dull ache that let’s me know I’m alive, lol. So I understand your issue with the seats. Every vehicle I own I have the seat adjusted so the rear of it sits as far down as possible...- MoPowered
- Post #21
- Forum: Introduction
-
Golden Hour
I had a 70 Olds 442 that was GM paint code 28 Twilight Blue Metallic and it was simply gorgeous at that time of the day, it picked up every color and highlighted the car unbelievably. Gets me all misty just thinking about it, lol.- MoPowered
- Post #6
- Forum: Member Trucks
-
From Ram to Ridgeline, back to Ram!
Welcome to the forums and congrats for coming back to your senses. Now I won’t ***** foot around when I say a Ridgeline ain’t no truck neither is a Brat, They are somewhere between a Car and an El Camino or El Ranchero. Kinda like calling a Chevy Corvair a sports Car.- MoPowered
- Post #20
- Forum: Introduction
-
TPMS Sensor...
Mine is on all the time, don’t care because I run 40lbs front and 38 rear remember tire pressures vary with heating and cooling so a cold morning less air, afternoon warm up, more heat more air. You can switch to nitrogen which helps in pressure values if you feel it’s that important. -
Water under back seat storage
Check the door seals and cab vent seals on back of the cab.- MoPowered
- Post #6
- Forum: General Discussions
-
Golden Hour
That is just too cool, you should have parked it facing the Sunset and took some picks with it that way too. I’ve always wanted to throw some stripes on my Truck in a Yellow Gold, Sunset Orange and Crimson Red. Since the Truck is black it would really pop.- MoPowered
- Post #2
- Forum: Member Trucks
-
finned aluminum cover on 11.5 AAM rear axle in a2017 2500
Nice looking cover, everyone considering one one just remember the AAM and Banks are proven not to foam and thereby not destroy the viscosity of the gear oil. “Other” manufacturer’s diff covers can cause improper lubrication and foaming and destroy your differential.- MoPowered
- Post #12
- Forum: Heavy Duty
-
-
Who all uses their trucks like a truck!? Let’s see pics!
Good looking rig, should be no issues. looks like it’s leveled?- MoPowered
- Post #186
- Forum: Heavy Duty
Latest posts
-
-
-
Intermittent power steering problem at slow speed or stopped.- Latest: Harley Harrold
-
-