2014 q.c. Oem steps

[R.L.K.]

Funny thing Mopar doesn't have a wheel to wheel step for the QC , the type that gives that little extra for access to the front of the bed .
I really like the factory step looks , the RAM logo , the grip pads and the mounting , the one thing I find they offer That some others don't is they stick out just far enough to prevent door dings !

So I go to a local dealer and find out they don't offer the black tubular steps in a wheel to wheel like they do for the crew cabs ?

My Q is = does anyone know if the factory steps for a CAB length CC will bolt up to a QC ? If so this should give a little extra for bed access on a QC .

I'll be going back to the dealers lot tomorrow with a tape measure to find out for sure , just wondering if anyone has done this already ?

 

[R.L.K.]

Well , I went to a local dealer today with my 2014 QC and a tape measure ... turns out CC & QC steps are one in the same , now bare with me , the wheel base is the same QC & CC and the mounting holes ( Fwd and aft ) are in the same location , sorry not certin on the mid location . Looks like the wheel to wheel MOPAR steps pick up only two mount points the farthest fwd and the farthest aft , at least the steps I seen installed at the dealer today. The cab length steps pick up the mid mounting location .
For what it's worth I did confirm today Mopar does not offer a Black tubular wheel to wheel step for the QC or the CC .