Coolant Leak Magnum 5.9L

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
J

joepizuro

Senior Member
Joined
Jun 3, 2012
Posts
457
Reaction score
46
Ram Year
1998
Engine
Magnum v10
She'll get the job done.
 

Hotroder383

Senior Member
Joined
Jan 7, 2012
Posts
235
Reaction score
5
Location
Washington Mo
Ram Year
1996
Engine
318 or 5.2 which ever you want
<shakes my head and walks away> That stuff is loved by engine builders every where, cause it is a really good way to plug the rad up and over heat a motor forcing a rebuild or replace. But hey if it stopped your leak and your happy with it more power to ya bud!
 

Mopar1973Man

Senior Member
Joined
Aug 22, 2011
Posts
825
Reaction score
21
Location
New Meadows, Idaho
Ram Year
1996, 2002
Engine
1996 Dodge 1500 (V8-5.9L) & 2002 Dodge Ram 2500 (5.9L Cummins)
I ran some Bar Stop Leak stuff through it before I took anything apart because a guy that works on trucks for a livin told me it wasn't the bypass hose he guaranteed it. So now it doesn't leak anymore. Going to flush half out tomorrow and put more anti freeze in it since it's running on water.

(Shaking head as well)
Stop leak produces are a bad idea... Really bad idea...

If the coolant was change when its suppose to cooling system failures NEVER happen I mean never! I've got a 2002 Dodge Cummins with over 197K miles on the clock and it 10 years old. The radiator is like brand new inside and block is just barely starting to rust.

5 years and 100K miles.
block.jpg


radiator.jpg


Now 9 years and 180K miles.

block9.JPG


radiator9.JPG


So the simple fact you getting coolant leaks, pump bearing failure tell me you not changing the coolant every 30K miles or 36 months. What happen is the coolant turn acidic or basic over time and will eat the metals, gaskets, water pump seal, water pump bearings, etc. I've never had a single coolant leak now in 10 years nor a overheat condition.

So if it was me...

I would flush the entire cooling system, pressure test it, replace anything questionable (water pump, etc). Reload with fresh coolant and water mixed 50/50 before pouring into the radiator. Be happy the little V8 engine is nothing for coolant like a 1.5 gallons roughly. Try the Cummins engine at 6 gallons!
 

Bigtman07

Registered User
Joined
Jun 28, 2010
Posts
9,329
Reaction score
287
Location
Piqua, Ohio
Ram Year
2000
Engine
Cummins 5.9
^^^Change interval is 30K? Wow I totally missed my last change I was thinking 50K
 

408wannabe

Junior Member
Joined
Jun 3, 2012
Posts
9
Reaction score
0
Ram Year
1995
Engine
5.9
NOOO the time and what you spend on a hose is all extreamlly minor. Tape, glue, sealant, or what ever you might be thinking of putting on will not hold. Hoses flex and expand with heat and every day driving... your going to loose all off your coolant and be sitting on the side of a road again if you think thats going to be your fix. And your truck wont make 250k with those kinda fixes.
 

Mopar1973Man

Senior Member
Joined
Aug 22, 2011
Posts
825
Reaction score
21
Location
New Meadows, Idaho
Ram Year
1996, 2002
Engine
1996 Dodge 1500 (V8-5.9L) & 2002 Dodge Ram 2500 (5.9L Cummins)
^^^Change interval is 30K? Wow I totally missed my last change I was thinking 50K

Every 30K for the Cummins engines. As for water everyone suggest distilled water... But the pictures above are with standard ol' tap water from the well. No scale, no lime, no build up. Cooling system is absolutely clean.
 
OP
OP
J

joepizuro

Senior Member
Joined
Jun 3, 2012
Posts
457
Reaction score
46
Ram Year
1998
Engine
Magnum v10
lol (hangs head)
 
Last edited:
Top