Cloviz
Senior Member
- Joined
- Feb 3, 2014
- Posts
- 214
- Reaction score
- 35
- Ram Year
- 2013
- Engine
- Hemi 5.7
ok lets do this.
first things first, we need to pull down the center console. you'll find four connectors holding it to the roof as dictated in the pictures here:
there are 2 located about here on both sides
and the other 2 are located here:
got them popped out? perfect! now seperate the gray piece from the black, stared from the front(closest to the window) the reason for that is because there are 2 "feet" towards the back that we dont want to break. the rest is connected by little tabs that just snap off fairly easy if you ate your Wheaties this morning.
did you break anything? if yes then stop what youre doing, oh you didnt? then lets continue.
you can pop that grey piece back up, you should see some grey plastic "pegs" holding up the chrome piece located here:
of course mine are off already but you want to take a flat edge screwdriver or hobby knife and cut those off.
the light will now pop off but take care puling it out. the light is attached to the chrome piece.
pop the chrome piece off by unhooking the chrome tabs. you have freed the ugly old light now
now take your new light and put it in and test to make sure you got it in the right way......no, turn it around......there you go.
you can put it all back together now but remember the "feet" on the black plastic piece. OR if you want that chrome piece back in you can take and drill small holes where those pegs where at and screw it on. i used some t6 torx screws from an xbox one controller as i had them on hand.
i know the chrome piece isnt in on this pic but who cares BLUE LIGHTS!!!!!
as for the light located here you cant change it out as the whole led is encased in plastic
first things first, we need to pull down the center console. you'll find four connectors holding it to the roof as dictated in the pictures here:
there are 2 located about here on both sides
and the other 2 are located here:
got them popped out? perfect! now seperate the gray piece from the black, stared from the front(closest to the window) the reason for that is because there are 2 "feet" towards the back that we dont want to break. the rest is connected by little tabs that just snap off fairly easy if you ate your Wheaties this morning.
did you break anything? if yes then stop what youre doing, oh you didnt? then lets continue.
you can pop that grey piece back up, you should see some grey plastic "pegs" holding up the chrome piece located here:
of course mine are off already but you want to take a flat edge screwdriver or hobby knife and cut those off.
the light will now pop off but take care puling it out. the light is attached to the chrome piece.
pop the chrome piece off by unhooking the chrome tabs. you have freed the ugly old light now
now take your new light and put it in and test to make sure you got it in the right way......no, turn it around......there you go.
you can put it all back together now but remember the "feet" on the black plastic piece. OR if you want that chrome piece back in you can take and drill small holes where those pegs where at and screw it on. i used some t6 torx screws from an xbox one controller as i had them on hand.
i know the chrome piece isnt in on this pic but who cares BLUE LIGHTS!!!!!
as for the light located here you cant change it out as the whole led is encased in plastic
