Morimoto XB LED CAN-BUS Install Info (2015 RAM 1500 Sport with Projector OEM)

[departureown9072]

Hey Guys!

New to this thread but I am looking for any info on where to install the CAN-BUS resistors on my Morimoto XB LED headlights. I have a stock 2015 Dodge RAM 1500 Sport with OEM projector headlights. Any info and advise is greatly appreciated.

Thanks in andvance!

 

[departureown9072]

Any help?

 

[jeeperrob_k3rob]

These forums seem to be dead. I unfortunately cant help you. But typically a resistor would go between the factory harness and the new light assembly.

 

[billyw]

I'm also driving a '15 1500 with projectors and intend to do the same upgrade this summer. It seems like a pretty straight forward swap to me. Morimoto seems to think so anyhow.

 

[rubes7202]

I prefer just useing ALPH OBD and turn on the LEDs for the front lights and that will take care of you not having to use the canbus resistors.

 

[Jacob Maguire]

https://www.youtube.com/watch?v=7ZKolHxUVC0&list=PLv4b0xy-gWlZ1KBV9Yj898Tbvj21LdMNn&index=105