Kingsize
Senior Member
- Joined
- Feb 15, 2017
- Posts
- 119
- Reaction score
- 97
- Location
- Mont Belvieu, Texas
- Ram Year
- 2017
- Engine
- 6.4 Hemi
Finally got the Power Wagon front suspension bits in the truck this weekend. It ended up leveling the truck to within a 1/2" of level, with the nose down very slightly. Started with measurements of 43 5/8" Rear and 40 3/4" Front, ended with 43 5/8" Rear and 43 1/8" Front. Getting the springs in and out was a pain, but the install was fairly straight forward. My truck has the off road package, so it had Bilstein shocks already. And, with the addition of the PW front, it seems to ride much smoother than the jarring front end would allow prior. I'm completely happy with this mod. AMP Research steps are next to get rid of these Mopar ones that came on the truck. Then AEV Katla Wheels and 35's.
I used part numbers:
2x shocks - 68234553AD
2x springs - 68172138AC
1x track bar - 68193870AC
BEFORE
AFTER
I used part numbers:
2x shocks - 68234553AD
2x springs - 68172138AC
1x track bar - 68193870AC
BEFORE
AFTER