Bigboytoys
Senior Member
- Joined
- Jul 12, 2012
- Posts
- 772
- Reaction score
- 98
- Location
- Bamberg, Germany
- Ram Year
- 2004 QC 5spd
- Engine
- 4.7L
Truck is fixed!!!! No more squeaks, bangs, thumps, and NO MORE VIBRATIONS!Swapped out all three U-joints, and the center bearing on the driveshaft. U-joints were not that bad to swap out. Cutting wheel and table vice, and they came right out. The problem came with the center bearing. It was so rusted on, that we had to use a smaller cutting wheel to the bearing. But after 3 hours, the truck was back together, and runs as smooth as a baby's bottom!
