The_murdered_warrior
Junior Member
Hey all, second post to the forum. Great amount of info on here. I have an 01 ram with 225k and the motor is simply tired. its a real shame, too, because it runs amazing. Hasn't missed a beat since we got it with 160k. Now, i have another block that Im wanting to build while Im using the truck to go from school and other personal things.On to the mods.. Im wanting to do these mods and Im wondering how they'll do together. Basically Im going for:
512/512 lift, 264/274 duration and 110LSA cam
running stock roller rockers w/upgraded springs
Stock heads with .020 shaved (I went to the machine shop at school so I can have this done for free)
50mm throttle body, either from fastman or ebay
Hughes plenum plate and gasket
Long tube headers, with a flowmaster super 44, hi-flow cat, and an electronic dump after the cat
msd 8mm wires, Blaster coil, and 6al for ignition
24lb injectors
Can hemifever tune for these changes?
I understand that there are other threads on these subjects and parts, but i haven't seen any with the setup that Im looking at. Im 16 with a job that i work bi-weekly in place of shop at my vocational school, so none of this will be done overnight. Any input or recommendations are greatly appreciated. Regards, Billy
512/512 lift, 264/274 duration and 110LSA cam
running stock roller rockers w/upgraded springs
Stock heads with .020 shaved (I went to the machine shop at school so I can have this done for free)
50mm throttle body, either from fastman or ebay
Hughes plenum plate and gasket
Long tube headers, with a flowmaster super 44, hi-flow cat, and an electronic dump after the cat
msd 8mm wires, Blaster coil, and 6al for ignition
24lb injectors
Can hemifever tune for these changes?
I understand that there are other threads on these subjects and parts, but i haven't seen any with the setup that Im looking at. Im 16 with a job that i work bi-weekly in place of shop at my vocational school, so none of this will be done overnight. Any input or recommendations are greatly appreciated. Regards, Billy