Ramforums

__________________

leveled, 35x12.50R18 Nitto Trail Grappler's on CR Black Iron Villian's, Blistein 5100's, K&N drop-in air filter, Magnaflow exhaust, Blue LED dash. LED everything!

i know they have zone and PA but as far as a price i dunno .. they will chime in .

__________________

RamForum.com Administrator/Owner/Vendor

Click the link for info

What zip code would the body lift be shipped to? With that information we can provide you with a delivered price quote.

-PerformanceLifts.com

how much to ship to
Ontario, Canada
K7G 2V6

__________________

leveled, 35x12.50R18 Nitto Trail Grappler's on CR Black Iron Villian's, Blistein 5100's, K&N drop-in air filter, Magnaflow exhaust, Blue LED dash. LED everything!

The least expensive method usually ends up being the US Postal Service. Shipping with the USPS instead of UPS / FedEx will save a considerable chunk of money on brokerage fees. If Canada Post delivers mail to the above address the cost to ship a kit to K7G 2V6 is $95.25 USD. That is the actual USPS rate based on a shipment weight of 44lbs to the above listed postal code.

UPS and FedEx offer a lower standard shipping rate but they do charge a customs brokerage fee that in most cases costs more than USPS.

-Jeff

Simon, I Ordered from Jeff in the past and with USPS Option it is great. Sometimes though if Item is expensive enough Canada Post Charges a $15 Customs Handling fee, but that only happened once to me on a Big Box (E-Fan from Bob). Usually its thru Customs Fast. Also you Can Track your USPS Tracking Number through Canada Post as well. I plan on gettin an RCD 6" Lift Kit when I have saved enough! LOL. You may want to consider Gap Guards at one point as well for the rear anyways Good Choice...as that will keep you Higher from that Road Slush in the Winter Man.

__________________
6.1 Cam/Springs/Rods/Oil pump-SC3865-85 mm Ported TB W/Grnd-K&N-Pwr Wire-E-Fan-Hooker Headers-Flo Tech Y Pipe-Magnaflow 18" Dumped-B&M Shifter-TCI 2600 TC-Transgo HD w/Resist-TMR Delete-HD Cooler-Auburn LSD 4.56's-Mopar Cover- Modest 3" Lift-SRT Hood-RF Tactical Grille-Blk Lights-Cab Lights-OEM Hella Fogs- PWR WGN Flares-Black Bed Caps-Rails & Mopar 4" Step Tubes w/5x Amber-1OAK Steel Rims/285 Duratracs-Gator Mudflaps-Rolling Tonneau-Leather. Next:Hellwig-35's.

thanks guys

al so i have a man shift 4x4 lever will this be affected?

__________________

leveled, 35x12.50R18 Nitto Trail Grappler's on CR Black Iron Villian's, Blistein 5100's, K&N drop-in air filter, Magnaflow exhaust, Blue LED dash. LED everything!

Page 12 of the installation guide:

http://performancelifts.com/installa...ries/60123.pdf

-Jeff

I just put a PA body lift on my truck last weekend and I also have a manual 4X4 lever. All you do is reach up under it with a 13mm socket in hand. Loosen the bolt, and disconnect it. Once the body is lifted, go back up there and reconnect it. I had to do some slight adjusting to allow all full engagement of all the gears, but it was very very simple. Also, if you're wondering (I was before I put the kit on), the lever itself doesn't drop or anything like that from inside the truck. It'll stay right where its at and at the same height.

__________________

leveled, 35x12.50R18 Nitto Trail Grappler's on CR Black Iron Villian's, Blistein 5100's, K&N drop-in air filter, Magnaflow exhaust, Blue LED dash. LED everything!