Hydrographics - 4th Gen Rams - Introductory Pricing!!

0212353 · Mar 30, 2013

Lets get dippin'!!!

Through the month of April we will run our introductory pricing on our hydrographics services. $60 off the normal pricing!

The introductory pricing is limited to the 4th Gen Rams, but please - reach out for pricing on any other items! Please contact me directly in email, [email protected]

Details can be found here - Hydrographic - Water Dipped Interior Trim

Go from this:

to this (sample, you do NOT have to get rain drops if you don't want it!!)

Pricing includes:

Center Stack
2x vent trim
2x steering wheel trim (if applicable)

The center console is optional, as not all Rams have this part.

Take a look around at these links for what water transfer films we can get and use on your truck:

Water Transfer Printing Film | Hydrographic Film | Water Transfer Film
Film Patterns

Again, pricing is set through April.

4x4Hemi · Mar 31, 2013

sweeeeet

im assuming if you have the unpainted dash like i do, youd need to have it painted first? unless you want that brown shining through :/

0212353 · Mar 31, 2013

Correct sir, but it may also depend on the film used. That wouldn't be a bad base for the camo prints.

BAILEY1 · Mar 31, 2013

Sweet! The pics looks really nice.

quietpeen · Mar 31, 2013

Does the price include painting the background color?

0212353 · Mar 31, 2013

BAILEY1 said:
Sweet! The pics looks really nice.

quietpeen said:
Does the price include painting the background color?

Pricing assumes we are using the color you currently have in your truck. If the effect you are after requires a color change, we can accommodate that, I'll need to triple check on the price of painting the parts, I believe that would run approx $75. So much depends on the pattern selected, some fully cover the part, some are transparent and use the background color (as mine did).

Best bet, please shoot me an email with the details and I can confirm with the dipper prior to ordering. :mexsmoke:

Jake2012 · Mar 31, 2013

Are we able to get a pattern from ShawNaughty Design? I didn't see that choice on your link.

0212353 · Mar 31, 2013

We can get those too. Shoot me the pattern and I can check if its the same cost - as some of those are a little higher than the standards.

ShawnNaughty has some REALLY neat stuff! This is their "venom" design that just came out (this is over silver):

snake heads were a little larger than I expected though.

Liberty is awesome too!

This kinda shows the differences made with different base colors - all of these are the same design.

Jake2012 · Mar 31, 2013

I would like this one.

0212353 · Mar 31, 2013

I'll check on that one, I like that pattern too! I know we can get it, just want to ensure its not going to run us more than the norm.

That looks to be over silver as well, the ones over red and blue are FREAKING neat too. Just amazing what they can do with this stuff!!

Jake2012 · Mar 31, 2013

Mine would be over silver. What's the turn around time after you get the parts?

0212353 · Mar 31, 2013

Typically less than a week, the guy does this full time - has a shop, just depends on what all he has going on at the time. But, he turned mine a LOT quicker than I thought (sure, getting business!), but my expectation is to get them turned in 3-5 business days.

Off to church and family fun, will be back this afternoon fellas!!

Jake2012 · Mar 31, 2013

I'll take mine off today and get them out to you in the morning. Ok?

0212353 · Mar 31, 2013

that will work!

Keep in mind though, if the print isn't in stock, we'll need a couple days to get that in as well. But, I can tell him exactly the print, and get that ordered when your parts are in shipping.

Jake2012 · Mar 31, 2013

What's the address?

blackout11 · Mar 31, 2013

Hey whats the price per square inch so we can can idea on other parts either answer that here or hit me with a pm

0212353 · Mar 31, 2013

Jake2012 said:
What's the address?

When each order goes in, I'll shoot out the shipping address for these. :driver:

blackout11 said:
Hey whats the price per square inch so we can can idea on other parts either answer that here or hit me with a pm

I can't remember what he said the standard is, best bet - pop me an email with pics of what you are looking to have done and we'll get back to you.

blackout11 · Mar 31, 2013

K will be the battery cover the engine cover the radiator shroud thing and the cia box lol ill get pics when ever it stops pouring

NUTSHEMI · Mar 31, 2013

Is there a write up anywhere on removing all the dash pieces?

blackout11 said:
K will be the battery cover the engine cover the radiator shroud thing and the cia box lol ill get pics when ever it stops pouring

Stop giving me more ideas lol

0212353 · Apr 1, 2013

Not really a write up, its relatively simple though. Just need some trim removal tools!

The driver's vent was simple. Pass vent........took a little more! Bottom ones "stuck". The steering wheel ones, they......are kinda stuck under the airbag. but a good yank, bam.

On the dash, see above!

Also, few emails came in on adding / deleting parts of the kit. If we don't need to do do the steering wheel parts, $25 off. Don't want the vents done, $30 off. Need the parts painted before dipping (as some prints will need a different base color) - $75. And....we can piecemeal that out if you aren't doing the full kit too.

And........the Sean Naughty Designz - those are included in the price! May take a few extra days to get it in - but we can do it!

Thanks guys!

Hydrographics - 4th Gen Rams - Introductory Pricing!!

Vendor

Senior Member

Vendor

Senior Member

Senior Member

Vendor

Senior Member

Vendor

Senior Member

Vendor

Senior Member

Vendor

Senior Member

Vendor

Senior Member

Senior Member

Vendor

Senior Member

Senior Member

Vendor

Similar threads

Forum statistics

Share this page