Lifted 4th Gen Pics - Show Em Off!

[JoeKer]

Yo Brandon! Your truck is sick Bro!!! I was one phone call away from the 2500 when I talked myself out of it. Built the 1500 and called it a day. Haven't had any regrets until your new pics just showed up. Those deep lips are insane. How much front rake you got? Nicely done my friend. Nicely done. I hope at the end of the month mine turns out as clean as yours.

 

[brandonjansen]

Yo Brandon! Your truck is sick Bro!!! I was one phone call away from the 2500 when I talked myself out of it. Built the 1500 and called it a day. Haven't had any regrets until your new pics just showed up. Those deep lips are insane. How much front rake you got? Nicely done my friend. Nicely done. I hope at the end of the month mine turns out as clean as yours.

Thanks man! I appreciate it! I started out building a 1500. Ended up doing a 6" lift with Bilsteins, Fuel Hostages, 35's... the full list. Traded it in after owning it for 10 months (1 month after putting the lift on. lol.). Just needed to get up into a HD truck with a Cummins. It's been a dream to build one since I was 13 so I figured I better do it.

The truck sits pretty much dead level. All 4 fender heights were right around 50" last time I measured.

What's the plan for your truck??

 

[mondo]

Here's my 14. Zone 6.5", 37" Nitto, 22" BMF Rehabs. I'm still thinking of either painting the bumpers white or leaving them and go with chrome grill.

 

[Boomerboomer]

Not as nice as others? ....that truck looks AWESOME! What fun would it be to just buy a finished truck. The fun part is figuring out , saving and eventually getting the upgrades.

 

[bamablack11]

-24 offset on a 10" rim with 35x12.5s will stick out.. How far?

 

[brandonjansen]

-24 offset on a 10" rim with 35x12.5s will stick out.. How far?

Approximately 2.75" past the fender depending on the tire. 1.75" past OEM flares if you have them.

 

[bamablack11]

Ehh.. Bit more than I want.. I have the flare and don't want the rubber to run more than .5" past them..

Back to the drawing board.. Looks like the truck will be off looking with a 4" lift and stock 33s till I find my combo lol

 

[JoeKer]

Thanks man! I appreciate it! I started out building a 1500. Ended up doing a 6" lift with Bilsteins, Fuel Hostages, 35's... the full list. Traded it in after owning it for 10 months (1 month after putting the lift on. lol.). Just needed to get up into a HD truck with a Cummins. It's been a dream to build one since I was 13 so I figured I better do it.

The truck sits pretty much dead level. All 4 fender heights were right around 50" last time I measured.

What's the plan for your truck??

50"?? Thats awesome! My wife would kill me if I traded in my truck after spending all this money lol.

I've got the Zone 6/5 with Fox's and Bilsteins sitting here waiting for my install date. 20x10 -24 Offset Fuel Mavericks and 35x12.5.20 Toyo Open Country At2's delivered and waiting as well. I do a lot of beach driving during the summer and none of the MT's got great reviews in the sand. I guess the large channels in the tires tend to dig a nice hole. Anyhow I couldn't get an install appointment until April 30! Worked out well though because I tore my calf pretty severely last week and have been home ever since. Wife has to drive me around in her Acura cause I can't get in my truck.

 

[JoeKer]

Here's my 14. Zone 6.5", 37" Nitto, 22" BMF Rehabs. I'm still thinking of either painting the bumpers white or leaving them and go with chrome grill.

I'm partial to chrome but the all white looks good too. Good looking truck!

 

[MBofTexas]

2014 Blacked Out 1500 Express withs few mods......





Sent from my iPhone using Tapatalk

 

[mondo]

I'm partial to chrome but the all white looks good too. Good looking truck!

Thanks man! I figured to go against the grain and go with chrome. was going to go all white with black wheels but everyone has been doing that for a few years now.....lol

 

[eg166]

Hey guys I'm thinking about trading in my 2012 Cummins 4x4 for a 14' or 15' 1500 4x4. Only thing holding me back really is the height. My 2500 is bone stock except factory 20s and 33s. If I get a 1500 I already know I want to lift it to get it as high or higher then the 2500. Preferably higher cause my plans for the 2500 was a Carli 3" with 35s. So if y'all don't mind, can I get some measurements from guys with 4 or 6" lifts with 35s? I measured to the inside of the cab at carpet level and got 28". On the outside of the truck up to the pinch weld I got 17.5". Top of truck is 6'7"-6'8". Thanks in advance!!

 

[brandonjansen]

50"?? Thats awesome! My wife would kill me if I traded in my truck after spending all this money lol.

I've got the Zone 6/5 with Fox's and Bilsteins sitting here waiting for my install date. 20x10 -24 Offset Fuel Mavericks and 35x12.5.20 Toyo Open Country At2's delivered and waiting as well. I do a lot of beach driving during the summer and none of the MT's got great reviews in the sand. I guess the large channels in the tires tend to dig a nice hole. Anyhow I couldn't get an install appointment until April 30! Worked out well though because I tore my calf pretty severely last week and have been home ever since. Wife has to drive me around in her Acura cause I can't get in my truck.

Yes sir. Slightly over 50" if I remember right

Nice man! Sounds like a good setup. Looking forward to seeing the pics!

 

[JoeKer]

Thanks man! I figured to go against the grain and go with chrome. was going to go all white with black wheels but everyone has been doing that for a few years now.....lol

Yea I think the All white and Black looks awesome, but I also wanted to be a little different. There are some chrome haters on here. We need to build our strength with numbers lol.

 

[darkknight]

Already posted mine early but here is a new pic with new tires and rims installed.

 

[Cruizer]

Thought it was time for an update. Looking to add a bull bar next week if the brackets are done.

 

[BBRAM]

How's the ride with the zone 5.5 was wanting to do these lift on my truck but. I want 22x12 -44 offset and 37's but I just don't think I can fit that combo

 

[brandonjansen]

How's the ride with the zone 5.5 was wanting to do these lift on my truck but. I want 22x12 -44 offset and 37's but I just don't think I can fit that combo

You definitely won't fit those wheels/tires on only 5.5" of lift.

 

[BoldAdventure]

I can finally post a picture!

 

[4bocefus]

First dodge i ever owned and love it so far!