Lowered 4th Gen Pics - Show Em Off!

[slodsm]

Went from a lifted 10 ram Laramie to a lifted 12 tundra and finally corrected that mistake and got back in a ram. Haven’t had a lowered truck in 15 years so I bought a 2wd Laramie this time and dropped it 2/4 on 22’s, threw a muffler under it and a cai and a bed cover and I’m pretty happy with it. Going to probably add a tuner/pcm and throttle body in the next month or so and then when I wear these tires out I think I’m going to go a bit bigger and do 24x10 dub big ballers.

 

[ChiChi]

My 14 RCSB 5.7 express with the blackout package.

Just did a flowmaster Super 44
5 inch black tips
5 inch Tint w/low brow
2 inch rear spring and shock drop from ground force

I have a front 2 inch drop on its way so I’ll be doing that and some f150 end links before it goes for an alignment.




Sent from my iPhone using Tapatalk

 

[tones2SS]

My 14 RCSB 5.7 express with the blackout package.

Just did a flowmaster Super 44
5 inch black tips
5 inch Tint w/low brow
2 inch rear spring and shock drop from ground force

I have a front 2 inch drop on its way so I’ll be doing that and some f150 end links before it goes for an alignment.

Looks killer bro!!!
I also have the Ground Force 2" rear drop kit on my '16 rcsb.
Quick question though. You say you are getting a 2" drop for the front? Won't that screw up your leveled out look?

 

[ChiChi]

Looks killer bro!!!
I also have the Ground Force 2" rear drop kit on my '16 rcsb.
Quick question though. You say you are getting a 2" drop for the front? Won't that screw up your leveled out look?

Yeah but I want the truck to leave no questions that it’s lowered when you look at it. With my warranty I can only go two inches on the front and rear axle so it’s my only real final option haha


Sent from my iPhone using Tapatalk

 

[spdglez78]

I had the same issue.. I installed air lift 1000's and run 10psi in them. Rides like a dream, and no bottoming out. Only cost $100 and change and about an hour and a half of my time. even pulled the spare tire down and hid all of my airline. Used a hole already in the hitch to mount the valve. No drilling, no fuss, no muss!

2/4 Belltech dropped Quad Cab with Air bags for towing.
Where in the hitch is there a hole for air lifts?
I just put mine throught the bottom of the plate for now.

2010 Quad Cab 5.7 2/4 Belltech Drop, Flame Paint, Bak Flip F1, Looking to start into performance now

 

[DwnDak]

2/4 Belltech dropped Quad Cab with Air bags for towing.
Where in the hitch is there a hole for air lifts?
I just put mine throught the bottom of the plate for now.View attachment 122675

2010 Quad Cab 5.7 2/4 Belltech Drop, Flame Paint, Bak Flip F1, Looking to start into performance now

Is that 2wd? Seems nicely low.... Compared to my 2/4 drop. Must be 2wd.

Its not the exact same hitch that comes with the truck but the best image I could find in a minute on Google. To the left of the REESE logo there is a small hole partly covered under the main bar furthest edge of the chain plate very top left corner... Thats where I put mine. Its perfect valve stem size.

 

[tmark83]

Ran through carwash. Gotta detail her on my next free day.

Sent from my SM-N950U using Tapatalk

 

[mondo]

Ran through carwash. Gotta detail her on my next free day.

Sent from my SM-N950U using Tapatalk

What size drop and tire size? Looks good

 

[tmark83]

Ground force 2" front 3" rear. 22" wheels with 305/45/22 hankooks

Sent from my SM-N950U using Tapatalk

 

[Madhouse]

Mine's very similar to tmark83's. Belltech 2/4 22" Hellcat reps, 305/45/22 General Grabbers

 

[Trapinator]

Updated pic, new red bedliner

Sent from my SM-G930V using Tapatalk

 

[Trapinator]

Updated pic, new red bedliner

Sent from my SM-G930V using Tapatalk

Mopar Lip, painted to match

Sent from my SM-G930V using Tapatalk

 

[mondo]

Mopar Lip, painted to match

Sent from my SM-G930V using Tapatalk

Where did you find just the lip?

 

[Trapinator]

Where did you find just the lip?

Company called street concepts in California.

Sent from my SM-G930V using Tapatalk

 

[mondo]

Company called street concepts in California.

Sent from my SM-G930V using Tapatalk

Thanks. Do they had a website to order from?

 

[Trapinator]

Thanks. Do they had a website to order from?

Wasn't much on the website if I remember correctly I found them on Instagram and after following for a while I pulled the trigger. It's all fiberglass..uses factory valence fasteners..comes primered.

Sent from my SM-G930V using Tapatalk

 

[mondo]

Wasn't much on the website if I remember correctly I found them on Instagram and after following for a while I pulled the trigger. It's all fiberglass..uses factory valence fasteners..comes primered.

Sent from my SM-G930V using Tapatalk

I think i found them. Streetconcepts1? Wish they had a better website because i dont have instagram or FB. Are they the same people as cresspo? Looks like they sell the same wing.

 

[Trapinator]

I think i found them. Streetconcepts1? Wish they had a better website because i dont have instagram or FB. Are they the same people as cresspo? Looks like they sell the same wing.

Yeah that's it. I did everything through phone order. Shipping and invoice and everything went smooth for me if your wondering.

Sent from my SM-G930V using Tapatalk

 

[mondo]

Yeah that's it. I did everything through phone order. Shipping and invoice and everything went smooth for me if your wondering.

Sent from my SM-G930V using Tapatalk

Cool. Ill have to give them a call. Thanks!

 

[predat-r]

Company called street concepts in California.

Sent from my SM-G930V using Tapatalk

I'm really liking that lip!!!!!!

Sent from my SM-N920P using Tapatalk