Recent content by 70chall440

  1. 70chall440

    2014 2500 5.7 header recommendations

    I have seen some advertise their headers as for a 1500 and 2500 but most only say 1500. I watched a video which indicated that the motor mounts were different between the 2 which doesn't seem right to me. I think the only one that says their system fits a 2500 is ARH.
  2. 70chall440

    2014 2500 5.7 header recommendations

    I do have a Diablo intune but to be honest I am not impressed with it. That said I don't want to spend a bunch of time trying to "tune" it. The question is which shortys?
  3. 70chall440

    2014 2500 5.7 header recommendations

    As the title says I have a 2014 2500 Big Horn with a 5.7 which has about 48K on it. I want to replace the stock exhaust manifolds with some shorty headers and am looking for recommendations. I am not necessarily after max HP gains insomuch as I want to fix the broken studs and gain a little bit...
  4. 70chall440

    2014 Ram 2500 RA4 Navigation issues - what to change to?

    The antenna was tested and its good. The XM stuff works which I found interesting because I didn't have a current subscription but part of the service at the dealership they gave me a temp/free subscription and it works so I know its not the antenna. I have been looking at a variety of...
  5. 70chall440

    2014 Ram 2500 RA4 Navigation issues - what to change to?

    As the title says, I have a 2014 Ram 2500 with a RA4 Uconnect system, the nav lost its mind and is not working. It comes on and shows a vehicle icon and appears to be showing an area somewhere in the vicinity of where I am but is not remotely accurate. I took the truck to the dealer for the...
  6. 70chall440

    2104 Ram 2500 ABS recall gone crazy

    I personally think a lot of the problem lies in software versions. It seems like Chryco doesn't have version control and do not educate the dealers/techs as to what they are doing in terms of changing software loads/programs. In my case, it tool a complete and total system erase and reboot to...
  7. 70chall440

    DIY: 2013 Ram add OEM Backup Camera

    Have you looked at the other thread? There are some detailed pictures there.
  8. 70chall440

    DIY: 2013 Ram add OEM Backup Camera

    I agree, the dealer doesn't know what they are talking about. You would "think" that they would but as evidenced throughout this forum this just isn't the case. If you want to know what is entailed, check out the thread Mpgrimm2 suggested, it should give you a pretty good idea. It isn't overly...
  9. 70chall440

    Installing OEM backup cam

    Now back to the project I was working on before I started this...
  10. 70chall440

    Installing OEM backup cam

    Finally I am done, everything hooked up, everything put back together and the best thing; IT WORKS!!! I am posting some pictures of my radio connections in case anyone else does this. Cutting and soldering the new harness wires to the existing was the best and easiest solution. I left enough...
  11. 70chall440

    Installing OEM backup cam

    that is correct
  12. 70chall440

    Installing OEM backup cam

    I have looked at the front and rear cameras, tempting but I think I will be ok with the backup (assuming it works when I get done). I don't want to buy a jail break or some other device.
  13. 70chall440

    Installing OEM backup cam

    I didn't even know there was a cargo camera option. I will have to research it; where it is and how it works. The last time I tried to get these type of pins out I all but destroyed them. I don't understand how they are retained so I am not sure where to push/release. Also, the red face isn't...
  14. 70chall440

    Installing OEM backup cam

    so, here is my current plan, I am going to cut those 3 wires and solder the new ones to them verses try and take it all apart and possibly jacking up the connector. I will leave enough in the harness in case I ever want to hook something else to them (after this experience I sincerely doubt that...
  15. 70chall440

    Installing OEM backup cam

    No I don't have a cargo camera. So from what I am reading, these wires are for the cargo camera? As far as having he other wiring for the camera; there were only 2 wires at the back by the tailgate (for the locking actuator). Therefore I am very sure the camera wires were not present.
See more

Latest posts

Members online

... and 100 more.
Total: 1,770 (members: 150, guests: 1,620)
Robots: 1,826

Forum statistics

Threads
195,707
Posts
2,873,596
Members
156,590
Latest member
can ram

Share this page

Top