Recent content by blackbetty14

  1. blackbetty14

    '25 Tungsten at the Minneapolis car show... didn't love it

    My wife has a 2023 wagoneer with the pass screen. We have used it ZERO times in the last year and a half. They also come with the white interior which we opted not to get as we have 3 kids and a big dog. The Wagoneer also comes with the Turbo 6 (we opted for the 5.7 tho) so it sounds like they...
  2. blackbetty14

    Inline tuner 2023 RAM 1500 Rebel 5.7L V8 Hemi eTorque

    I've been looking at the pulsar XT... your saying these work on the 23 and 24 models with the etorque?
  3. blackbetty14

    Diabosport Pulsar XT for 23-24 ram 1500 anyone run it?

    hmmm no one?
  4. blackbetty14

    Diabosport Pulsar XT for 23-24 ram 1500 anyone run it?

    OVERVIEW Pulsar XT is an all-new take on drivability and calibration for your 3.6L and 5.7L Ram 1500. Unlike any other device on the market, Pulsar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced...
  5. blackbetty14

    Diabosport Pulsar XT for 23-24 ram 1500 anyone run it?

    Apparently the edge pulsar doesn't work on the 23-24 ram 1500 with Etorque. They have a new version called the diablosport pulsar XT which is not an inline/piggyback to the PCM but something that communicates through the canbus and splits the gas pedal. It doesn't affect the tune so no "power"...
  6. blackbetty14

    Earth magnets on oil filter

    Look up filter mag. I run that on a car and what it can stick to the side of the can is pretty Amazing. I don’t do it on my other 2 vehicles due to cost (they ain’t cheap) but a couple of rare earths works good to for visual inspections.
  7. blackbetty14

    airbox mod for cone filter

    It's your truck so do what you want but you haven't done anything good here and prob hurt performance and reliability. The stock filter has more filter area than your cone filter, you've added a hard 90 to the intake track which reduces flow and acts like 4ft of straight tubing restriction...
  8. blackbetty14

    Hemi tick: at least partly metallurgical

    When I build a motor I soak the lifters for like 15-30min and stick them in. For me its more about the lubing the lifter bore as I use Permatex engine assembly lube when I build the motor and I don't want that coming off the cam lobes. On any motor I've ever built I always prelube the motor with...
  9. blackbetty14

    Fitcamx

    Almost went with it bc of the OEM look but I wanted a dual camera setup and 4k.
  10. blackbetty14

    Remove your bed to cab seal asap!

    It was the same on my 2018 and 2014. The seal is designed to curl and press against the cab. The cab and bed are not missaligned as the side seals are not touching the cab either and have a similar 3/16” gap or so. This is a common issue with the ram pickups. Most don’t care but it always leads...
  11. blackbetty14

    Remove your bed to cab seal asap!

    Took everyone’s responses and formulated a compromise. So here’s what I did… cut the seal so it has about a 1/8-3/16” gap from the bed and doesn’t rub anymore but still covers 90% of the gap. Confirmed no wind noise today while on the highway or city driving. Let’s not forget that at the ends...
  12. blackbetty14

    Remove your bed to cab seal asap!

    Ive been driving them since 2014 and can't say the same lol. I think all manufactures suck but I still prefer ram over chevy and ford. Ram forgot how to build a engine that doesn't eat lifters, break manifold bolts, hoods that don't bubble from the inside out, rear roof leaks, delaminating...
  13. blackbetty14

    Water In Tray Under Rear Window

    This is easy to prove. Timelapse a camera of the jug in your truck and we can all watch the magic happen!
  14. blackbetty14

    Remove your bed to cab seal asap!

    Perhaps but for it to do a hard 90 at high way wind speed and pressure into that 1.5” opening after snaking around the tunnel insulation, gas tank, muffler etc seems pretty un likely. I agree that FCA wouldn’t invest in a seal it doesn’t deem necessary but I also question a lot about some other...
  15. blackbetty14

    Remove your bed to cab seal asap!

    Did you have that new years horn wind noise? I put 50 miles on the truck and had no real noise with at least 8-10miles on highway going 80mph.
See more

Latest posts

Staff online

Members online

... and 3 more.
Total: 1,266 (members: 53, guests: 1,213)
Robots: 1,904

Forum statistics

Threads
195,687
Posts
2,873,327
Members
156,558
Latest member
zstroken

Share this page

Top