Recent content by Bravo1

  1. Bravo1

    Fender flare, on or off?! Help

    I say keep them.One question though why is the setting's on the Bilsteins to low it looks like the truck sit level to me.
  2. Bravo1

    Bilstein's with Readylift

    Calicrew1500, Superlift's installation instructions states to set the blisteins struts at the OEM setting,and install the spacer on top. I have heard others thought set the struts at the .75 to 2.1.To try and level the truck due to the additional rear lift spring like mr-maenpaa shows in his...
  3. Bravo1

    Bilstein's with Readylift

    I purchase a Mopar/Superlift 4 inch kit most website's are discounting this kit 500.00 dollars.
  4. Bravo1

    Factory shark fin antenna.

    Is it possible to remove the roof sirrus (shark fin) antenna and mount it some were else? Or could I use another Chrysler fin like on the 300 which is lower.
  5. Bravo1

    Bilstein's with Readylift

    I am looking at Mopar's 4 inch lift,but was kinda disappointed by the restriction on wheel.Does anyone know why no 17x9 was this a fitment issue or was it a stability issue.Only 18x9,or20x9.
  6. Bravo1

    Bilstein's with Readylift

    I will check into that thanks for the idea.
  7. Bravo1

    Bilstein's with Readylift

    I have the Mopar 0"-2" inch lift installed and the rear springs have jacked up the back end 2 more inch's from the front again,when I called Mopar they stated that because of the tongue weight,they needed a 2 inch's lift spring,because once loaded to max,the rear end will be level.I hooked up a...
  8. Bravo1

    Ordering a 2015 Ram - Seeking Advice

    Was there a reason for not selecting a 2014 Bighorn,or Lone star.or Express packaged trucks they are discounting them around 10,000 dallors. Some have V6,that are loaded pretty nice.There is not much discount on 2015 yet.Either power train you select will be fine as long as you do not select...
  9. Bravo1

    Check your tire jack

    I really pray that Ram engineering listens to this,before final OK for the refreshing of the truck for 2017,that they take serious what people are saying about the current model year of truck.The jack is dangerous period and at best a poor attempt in saving weight,by cheating the jack assy and...
  10. Bravo1

    Check your tire jack

    I too have used this jack ,and found that in the owners manual it shows a little notch located on the lower control arm this is were they want you to jack the truck from and get this I think from looking at the picture,they want you to jack from the front of the truck.Check the picture out in...
  11. Bravo1

    Is 2" lift enough for 34 tire? How is Mopar lift kits?

    Super lift part number is K4600.
  12. Bravo1

    Bilstein's with Readylift

    So if I want to go to the last setting on the Bilstein at 2.8,I should get a pair of ReadyLift's or some Zones UCA's.This will free up that angle everyone is talking out.
  13. Bravo1

    Bilstein's with Readylift

    Ryan the kit that is in the truck is a Mopar 2 inch,which performs really well for its height.I am thinking of getting the 4 inch Mopar kit,from Superlift.I just need the kit minus the shocks and springs.
  14. Bravo1

    Bilstein's with Readylift

    Yea I agree,I have one more setting on the Bilsteins,so I might use this to take up the difference from FRT to RR.And have a 1 inch diff,and call it a day.Have you heard of anyone having problems with the 5100's and the max lift setting ?.
  15. Bravo1

    Bilstein's with Readylift

    I am about 2 inch of lift in the frt,with this setting on the Bilsteins,and with the ReadyLift 1.75 we would be close on CV,Ball joint angle as well.
See more

Latest posts

Staff online

Members online

Total: 1,240 (members: 50, guests: 1,190)
Robots: 1,793

Forum statistics

Threads
195,681
Posts
2,873,272
Members
156,543
Latest member
DakotaRT1999

Share this page

Top