They were installed correctly, but the ball joint was trashed on the mevas, I see how the angle is bad now, I just went with them Bc that's what I saw highly suggested on here
I set mine at 2.8 and replaced my UCA's with mevas a year ago. Zero off-roading and now my ball joints are toast and I am having to lower it back down and replace them.
Shop says the mevas are already toast Bc of the angle created by the bils at 2.8. Looks like I am paying 800 bucks to drop it down a notch and replace the upper control arms. Great!
I installed bils set to 2.8 and replaced my UCA's with mevas but I am having a lot of front end noise. I took my truck into a suspension shop hoping they could retorque everything and fix the problem but they seem to think the problem is the UCA's and angle of the spindle. Has anyone else had...
When installing thes spacers, was I supposed to replace the track bar with a longer one? I installed these a year ago and loved he new look, but now When viewing my truck from behind, it leans down heavily on the drivers side. When I crawled under you can see deflection on the driver side coil...
man I am not sure, I followed the installation video I watched on youtube really close. Do you have a diagram of how it should be? I assume I have to completely uninstall and reinstall to resolve? lol
So I installed some Bilstein 5100 adjustable shocks at 2.8 and now have a squeaking (louder than what you would assume is normal) in my front end when going over speed humps or hitting any bumps. I assumed it was the ball joints so I installed Mevotech replacements but still have the same...
Yesterday I got in 2012 ram after a heavy rain and there was some water on the back passenger headrest. when I crawled back there to look there was a wet spot on the headliner right where it meets the back glass. This is the only time I have seen this happen and there was no exterior damage or...
Nothing is better than pulling up to an outdoor bar with some good jams through the Bluetooth link, and then when you remote start the truck to leave, it defaults to Sirius preview and you get some Justin bieber or Adelle cranked lol
ok awesome! I really appreciate the help! Ill grab some paint at Napa and get them prepped. What do I need to do about greasing them before the install? Just pump the zirc up with normal grease?
Good morning,
I am going to replace my upper control arms next weekend and I was hoping someone had a good write up or walkthrough of the perpetration and installation process. I installed my Bilstiens myself so I am pretty confident in the installation but it is always nice when you can...
I will say the ones from Napa to look exactly the same as mevotechs but they are about the same price as some Moogs on amazon. Any suggestions on where I can get Mevotechs as I would love to save the money? Would the Moogs be better than the ones provided from Napa at the same price?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.