Recent content by Hemi8073

  1. H

    Finally into the 12s.

    Dyno would solve that. I would bet matt in his cam/heads running 12.0's is around 420ish at the wheels at 111 mph. My 03 is probably in the 390 range with heads and cam and runs around 12.50's in positive da at 105-106. Not gonna take away from your time man. Great run
  2. H

    Finally into the 12s.

    Very nice run man. But to be honest, 425-435 hp is probably a little far off, most with full bolt ons run in the 370-390 range at the wheels. But needless to say that's a good run. Perfect air as well
  3. H

    03 1500 rc 6.1 i think!!!

    Sounds like a lot of headache to up the block size to just go with the smallest cam available for these motors. With a stock 5.7 block you can go all factory everything from gaskets, bolts, heads, ecu, intake exhaust(or upgrade to pacesetter long tubes) and have just as much of a beast with a...
  4. H

    0-60 times

    Would really love to get some 0-60 times but I seem to have a little problem.....:) http://youtu.be/jv4raBgfoh8
  5. H

    Ram > SS Camaro?!?

    The 3.21 gears in a 8 speed are very close to the same overall ratio of 4.56's in a 6 speed, so your gearing is more than enough to have great times
  6. H

    Ram > SS Camaro?!?

    Being that the camaros and trans ams where mid to high 8 second 1/8 mile I believe it mike. My cousin had a 01 ws6 with Slp loud mouth exhaust and no filter at the track and was only running 8.60's in good air, mostly stayed around 8.8-8.9 in this hot summer heat, your truck would be close to a...
  7. H

    questions about torque converters

    10/4, trans temp will be fine. I am running the same transcooler you have on now with my 3600 9" stall and mostly do nothing but race. That will be a good setup for you buddy
  8. H

    questions about torque converters

    You don't need a trans cooler, that one is plenty big enough, same one I have, a lot of the other ones have one half that size. Your all set man as far as that goes
  9. H

    questions about torque converters

    What color was the fluid that was leaking?
  10. H

    question on increasing rev limiter

    12.3-12.8!!!!! I like mine where it's at! 13.0-13.4 and it screams like a bat out of hell Lol. Lean is mean!
  11. H

    question on increasing rev limiter

    You'll get use to it with time buddy, I hit 6400 rpms on the regular with the same tune. And with gears and headers that thing with start running through those rpms a lot faster so it won't have that feeling of blowing up lololol. Manual shift is your only option on a 03 but like said, with time...
  12. H

    questions about torque converters

    Do you know what gears you have, I know guessing 3.55's. If so and your worried about to much rpm, 4.10's would be a good choice for you over the 3.55's
  13. H

    questions about torque converters

    I'd do a 2800 circle d or edge 11" and get a factory 1 ton trans cooler from a dealership. That's should set you up pretty good. As far as the leak I am not 100% on what it would be
  14. H

    cam install and sound videos

    Nice, 4.56's on stock 20's with a 32" tire you will be at 2350 at 70 mph, not to bad at all, any tire shorter than that and it will start getting worse
  15. H

    cam install and sound videos

    Very good man. Congrats on the nice can and install buddy
See more

Latest posts

Staff online

Members online

... and 1 more.
Total: 1,288 (members: 51, guests: 1,237)
Robots: 1,894

Forum statistics

Threads
195,688
Posts
2,873,330
Members
156,558
Latest member
zstroken

Share this page

Top