I'll be ordering one soon. I have a 2018 and started looking at these almost 2 years ago. At that time there were still some sporadic issues and figured I would be better off waiting. Now I can adjust the tire size as well it will work fine for what I want. I don't need crazy performance out of...
Ended up getting a set. Figured i'd give it a try. Have the F150 ones from the early release and they have been perfect on the wife's truck.
Anyway, the lights work fine and look good. Put out about the same light as my 35w GTS HID setup so no complaints. Only complaint is the passenger side...
Same thing I did with mine. Stupid easy. The pitch lighter has a plug on the reverse wire. I have Led tail lights and didn't even have to cut the red wire that the instructions state you have to. Took longer to zip tie the wiring than install the light.
One thing you'll need to do is know out...
If you need them, as mentioned the hub centric adapters are the way to go. I know most say a proper offset wheel is the way to go but if you prefer say a stock wheel and just want to get it out a little farther, then the adapter is the way to go. As mentioned you need to keep up with them. Some...
Here's a set I like the looks of. They can be painted. If your Ram is Brilliant Black (not sure of the colors on different years) they have them painted as well but they do cost $$$.
https://www.bushwacker.com/bushwacker-50920-02-oe-style-fender-flares-front-and-rear
Putting Amp steps on a 2wd Reg Cab this coming Friday. Why, because they make getting in easier as others have said. I am get in but I have to put my butt on the bolster and then slide in. Will probably lower my truck a little (1" front and 2" rear) and know they still will help. On the reg cab...
I have toyed with this. It's been discontinued but if you look around you can find it for a good price. My issue is I have the bed lights which is why they got rid of it. I wonder if I can make a bracket to resolve that. Would be handy for me and the things I do secure from time to time. Plus I...
Yup those "Hex Heads" are made for rivnuts which fit into them. Then it's just the bolt you need not the nut. If you do the rivnuts. I highly recommend using a proper rib=vnut tool to install them. Makes it a lot easier to do.
Ok, I am resurrecting is old thread as this caught my eye. What t-bar is that you are using for the rear of your kayak. Been looking for that when we go camping and using my truck to pull the golf cart. Still want to bring the kayak.
Did they indicate what the fix is? Different plastic, chrome bezels, etc.? Interested as I have the Ford ones on my wife's F150 and have been very happy with them.
Thanks for the info. I should’ve mentioned only cab high. Wasn’t so sure about the rack on the snug top either. I actually prefer the ARE more. Agree about color matched, wouldn’t do it any other way. I know about the cost and I will have several accessories if I do go that route. Lastly, I have...
So I am considering going the camper shell route. I have a 2018 night edition in granite crystal metallic. Essentially it’s an R/T with black trim and wheels instead of chrome.
Anyway looking to see if anyone has done this on an R/T at all or even a night edition. Looking at the ARE Z cap or...
Just an FYI... 1aatuo and Trail Ridge are the same company. They will act like they are not but the parts ship from the same exact company address.
I have the Ford mirrors on the wife's truck and they are perfectly fine. Several over there are pretty sure they are an OEM supplier that just...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.