Recent content by Niveko

  1. N

    HVAC Actuator Problems?

    Did Dodge change the design of their re-circ door from gen 3 to gen 4? I appreciate the information. EDIT: I should mention that the knocking is in the same area where the re-circ door is failing to close/open; that being said, presumably the re-circ actuator is the culprit for both of the...
  2. N

    HVAC Actuator Problems?

    So there are two separate mechanical components to the re-circulation door, one being the actuator, and one being something else? What controls the re-circulation door from closing and opening, is it the actuator, or something else? I am capable of doing the job myself, just trying to narrow...
  3. N

    HVAC Actuator Problems?

    My heat is stuck on defrost only. The fan's speeds all work fine. The re-circulation door (which is located behind the glovebox) will not close and cycles a dozen or so times before stopping when the truck is started and produces a very audible knocking noise.. It also does this when the truck...
  4. N

    Transmission Help!!!

    I personally was leaning towards the torque converter or clutch pack for fourth gear (the overdrive clutch pack??) or both. Here's a hypothetical...If I lock the gear selector in 4th, and drive up to highway speeds and have no fluctuations/drops/surges in RPM through a light acceleration could I...
  5. N

    Transmission Help!!!

    125000km on it. It was serviced 7500 km ago. No codes. Transmission had a relearn done about a 1000km ago.
  6. N

    Transmission Help!!!

    If I let off the gas, the vibration will stop. There is 125000km on the tranmission. I was experiencing issues prior to me changing the fluid and filters about 7500km ago. I replaced them with oem mopar filters, and used Redline c+ for the tranmission fluid. I noticed no abnormalities in the...
  7. N

    Transmission Help!!!

    Hoping to receive some much needed insight and opinions on what is going on with my 545rfe transmission. I am experiencing an intermittent grinding, vibrating like symptom when in 4th or 5th gear, mostly on transitioning upshifts/downshifts. Lock-up feels loose, the slightest throttle...
  8. N

    Pro Edge Street Edge Converter Question

    Hi, I am looking to hear some reviews on owners who have replaced their TC with the Pro Edge Converters. I would like to know, between the 2600 and 2800 stall, which you chose and why. If anyone would like to comment on the differences between the two stalls, and what applications they are meant...
  9. N

    "Chirping" noise under the hood

    Appreciate the replies will give those a go, thanks.
  10. N

    "Chirping" noise under the hood

    I am experiencing exactly the same noise that the owner of the ram in this youtube video is. I am wondering if anyone has diagnosed the same problem with their truck and have fixed it. It sounds like the noise is on a revolution, which leads me to believe it is a bearing but that's just a guess...
  11. N

    Power Steering Pump Pulley/Bearing Replacement

    I suppose it is a matter of time before that audible squeal becomes a defective pump. I best be looking for a replacement. Thanks for your reply.
  12. N

    Power Steering Pump Pulley/Bearing Replacement

    Has anyone replaced a a noisy power steering pump pulley? Or has anyone replaced the bearing in the pulley? No one in my city sells the pulley, they just sell the pump, without the pulley. Ive deduced that the squealing is coming from the pulley and would like to replace it or the bearing, but...
  13. N

    Torque Converter "warble?" - Star Case

    Thank you for your reply. The two aftermarket choices for TC's on these forums are the edge and circle D. Any recommendations?
  14. N

    Torque Converter "warble?" - Star Case

    Good afternoon ram owners I am experiencing a shuddering/vibrating/driving over noise strips symptoms at certain speeds when the converter is locking and unlocking. It is intermittent, and I avoid those zones where it is possible for it to happen. I do feel like its gotten mildly sloppier as...
See more

Latest posts

Members online

... and 2 more.
Total: 1,300 (members: 52, guests: 1,248)
Robots: 1,400

Forum statistics

Threads
195,948
Posts
2,876,198
Members
156,938
Latest member
papatony

Share this page

Top