Recent content by Opie011

  1. Opie011

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Thank you for setting me straight....looks like I'll be looking for a UAx radio! Thanks again!
  2. Opie011

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Ok sorry if these questions have been answered but kinda in a rush to decide so not much time to research. Found a RA3 radio from a 2017 2500 local and the guy wants $175 but says the screen is cracked and does not function but did before it was cracked....came out of his truck. He says a new...
  3. Opie011

    Tire size change alfaOBD

    I have 285/75/18 Ridgegrapplers and Nitto says they're 35.1" tall. I set the circumference to 2690mm(33.7" tall) and my speedo is accurate. Forgot what they measure when mounted but pretty sure they are taller than 33.7"...but hey the speedo is accurate!
  4. Opie011

    AlfaOBD

    I have the quad housings and set my setting to HID present even though I have LEDs in the low beams. From what I've read, setting the HID present disables the PWM for the lows and setting to LED present does not. I'm using the HR V.4 bulbs with their driver but not using the PWM modules that...
  5. Opie011

    AlfaOBD

    I'm using the Galaxy S9 Plus with Android version 8.0.0 and Alpha crashes on me
  6. Opie011

    AlfaOBD

    Same here unfortunately
  7. Opie011

    AlfaOBD

    I think someone on the cumminsforum tested low beam and that the LED setting did not disable the PWM but enabling HIDs disabled the PWM. I've enabled HIDs with my HR V.4 LED bulbs and no issues!
  8. Opie011

    AlfaOBD

    Well my firmware version works! It still shows the hitch(tailgate) camera when put in reverse but, while driving I select controls and hit cargo camera and then I have to select the hitch camera to have it show up. Didn't test mph shutoff but the camera stays on while not moving but if the...
  9. Opie011

    AlfaOBD

    Yeah that was my next step to enable the code and see if it works....just too lazy to try tonight! Wasn't sure if the 17.11.07 was a typo since mine reads 17.11.17. Thanks for the reply as always!
  10. Opie011

    AlfaOBD

    I just checked my firmware on my radio and its 17.11.17. I haven't tried the CHMSL trick but is there a firmware between the two you said that I may have?
  11. Opie011

    AlfaOBD

    I like and use SRT 4 in my truck. The Ram backgrounds are boring!
  12. Opie011

    AlfaOBD

    Hey I could use these. If Arth doesn't take them I will.
  13. Opie011

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    What are you needing done? I'm in Arvada but haven't done this conversion yet, waiting for the right set of seats to pop up.
  14. Opie011

    AlfaOBD

    It's under Vehicle Config 3: High Intensity Discharge Head Lamps
  15. Opie011

    AlfaOBD

    Check this thread out. Someone tested the different settings and is saying to disable LED low beam in the CBC and enable HID as it turns off the PWM!! https://www.cumminsforum.com/forum/2013-general-discussion/2486949-adjusting-light-alphaobd.html
See more

Latest posts

Members online

... and 1 more.
Total: 1,247 (members: 51, guests: 1,196)
Robots: 1,356

Forum statistics

Threads
196,077
Posts
2,877,498
Members
157,110
Latest member
Hairy_pineapple58

Share this page

Top