Recent content by PigSooieHailGul

  1. PigSooieHailGul

    Truck won’t crank, anti theft light flashing

    Can Diablo Trinity fix it? I do have that on my truck.
  2. PigSooieHailGul

    Truck won’t crank, anti theft light flashing

    I have mallard Curlies covering my truck lol So locksmith came out and tried my key and recorded another. He got both to work to unlock and lock but said the trucks immobilized wasn’t responding to my key.
  3. PigSooieHailGul

    Truck won’t crank, anti theft light flashing

    I’m going to call a mobile locksmith now actually to come see what they can do. And my other fob is in Bayou Metro WMA somewhere after I dropped em duck hunting a couple years back
  4. PigSooieHailGul

    Truck won’t crank, anti theft light flashing

    The battery was replaced in June 2017, took it to be tested today at Oreillys and left there all day to be charged. They said the battery test good. :/
  5. PigSooieHailGul

    Truck won’t crank, anti theft light flashing

    So the other night I left the key to ACC and got out. Next day hopped in to go and all the lights on my dash were lit and NO BUS on odometer. Key was stuck. I checked all the fuses and fine and unplugged and plugged back every plug I could find on the truck(took forever). Still nothing...
  6. PigSooieHailGul

    Abusive RPM range?

    And just because it can rev to 7200 doesn't mean it would benefit. You need to see tuned dyno graphs as to where the power band does off and no point in taking past that.
  7. PigSooieHailGul

    Towing with a Hemi Fever tune

    Your tune if done properly and I'm sure it was, will adjust for the different loads put on the motor. You will be fine. People ******* with their tune is how motors blow. Once tuned, 99% of users need to throw away means of adjusting them ha. I tuned drag imports for 7yr and it was crazy those...
  8. PigSooieHailGul

    P0300 and can't track down culprit

    #7 no compression :/ ****
  9. PigSooieHailGul

    P0300 and can't track down culprit

    After it runs a sec then dies it takes a bit to start but if I stop while it's cranking then try again it fires up like it wasn't getting fuel. But the smoke is like no fire. Odd cause it's only on those 3 cylinders.
  10. PigSooieHailGul

    P0300 and can't track down culprit

    It's a new rebuild. It's from a 2011. I just replaced the crank and now the cam sensor. No change but runs a tad better. Now I am noticing white smoke out the back.
  11. PigSooieHailGul

    P0300 and can't track down culprit

    Wellthat code won't come back now that I cleared it but still coming back as misfires. Replaced the crank runs same. Removed cam shaft sensor and wiped off now it runs worse and struggles to start.
  12. PigSooieHailGul

    P0300 and can't track down culprit

    I just put new crank sensor on it. Now she still acts up but throwsa p050b code too
  13. PigSooieHailGul

    P0300 and can't track down culprit

    I'm sure y'all getting tired of my issues... Finally got everything lined out on my reman 5.7l. Now it runs like **** unless you give it throttle. I tested 2,4,6,8 cylinder and only 2 runs good. I tested by unplugging coil packs. Then swapped 2 in the others and 2 still runs good. So I...
  14. PigSooieHailGul

    Jba longtube dipstick problem

    What are you guys doing to get the dipsticks back in? 2012 Ram 5.7l. Had to put new motor in so dipstick was removed. Installed jba longtubes now can't figure out how and where you guys are bending them.
  15. PigSooieHailGul

    Two Left Heads on motor...help

    So I bought a reman motor from ProEngine LLC. First they told me,a week later after reminding them to ship the damn motor, that there was a delay due to inclement weather. They don't realize I track weather for a living and know that's a lie. Second it was to come with all gaskets, nope I had to...
See more

Latest posts

Staff online

Members online

... and 2 more.
Total: 924 (members: 52, guests: 872)
Robots: 1,676

Forum statistics

Threads
195,653
Posts
2,872,966
Members
156,497
Latest member
Pwsr

Share this page

Top