Search results

  1. LaurenMagnum360

    200 amp alternator

    Hey everyone, just wondering if anyone here has seen these on ebay, and if so, can you give your opinion on it? I picked this up today, also ordered 50' of 1/0 AWG copper welding cable, with some terminals, fuse block, and some 250 amp fuses to replace the alternator wiring, grounds, and...
  2. LaurenMagnum360

    Intermittant no power issue

    Weird Issue I just had in my truck, happened 2 times in the winter. Went to start my truck, and acted like the battery was weak. The starter clicked and lost all power in the cab. Tried Jumping it and nothing, no power to nothing in the cab, even the lights wouldn't turn on with the cables...
  3. LaurenMagnum360

    2nd gen body lift shift linkage

    Does anyone have a picture of the shift linkage they needed to weld when doing a 2-3" body lift?
  4. LaurenMagnum360

    timing chain gasket / waterpump

    Hey guys, any of you work at a dealership? What would i be looking at to get the timing chain / gasket, and waterpump replaced on my 5.9 v8? and radiator hoses too? i think my timing chain cover is finally starting to leak coolant and i dont have a place to work on the truck myself.
  5. LaurenMagnum360

    oem fog light harness

    can someone who has factory fog lights on their 98-01 ram take a picture of the factory harness please? i'm trying to find the plug on my truck (think i found it) so i can get the appropriate harness so i can install my new oem fogs. :)
  6. LaurenMagnum360

    tach signal

    hey guys, so i just ordered a remote starter for my truck, and i'm looking over the install and it's straightforward however..... the wiring diagram for my truck is telling me to go straight to the coil wires for a tach signal and i dont want to do that, because i dont like having unnecessary...
  7. LaurenMagnum360

    2nd gen ram passenger battery tray

    hey guys, im trying to find a passenger side battery tray for my 2001 ram. i need the tray, the mounting hardware, and the battery hold down. thanks. shipped to 60005 btw
  8. LaurenMagnum360

    exciting new plans

    So a few weeks ago, i was on here asking about what parts i need to swap a nv4500 into my 01 5.9L 4x4. well.... i recently got a promotion at work, along with a nice pay raise. Therefor, i am going to be doing a 4bt swap with an nv4500 next summer. anyone have some info on this swap? i...
  9. LaurenMagnum360

    98-02 auto to manual parts list

    can anyone list a complete part list needed to convert my 01 5.9 4x4 auto, to a manual? don't say buy another truck, cause it isn't happening. And I am capable of doing such a swap, just want to have everything before next summer so i can do it over a weekend. thanks
  10. LaurenMagnum360

    hitch / receiver

    question i put a curt class 3 hitch on my truck, and have a receiver, and itseems to have more wiggle room on it than the hitch on my old chevy. almost like the pin that secures it is too small. how much wiggle room is there supposed to be? and any forward backwards wiggle?
  11. LaurenMagnum360

    My truck is a mutt -___-

    so my truck is a mutt -__- I go to get a oxygen sensor for it..... in and out in five minutes. get home.... the plug is different.... i'm like ok, lets try a california model one...... eenoope didn't work either...... the plug on the new sensor was square, but the truck plug is...
  12. LaurenMagnum360

    14x3 filter questions

    so i'm wanting to do the 14x3 filter on my truck before i move, and really my only question is what size threaded rod do i need to screw into the throttle body to hold the filter lid on with?
  13. LaurenMagnum360

    Finished my exhaust finally :3

    So my exhaust is finally finished to how i want it to sound. Stock manifolds to stock cat, to a Flowmaster Hushpower 2 Resonator, to a (no name) 2 chamber muffler (Flowmaster 40 clone) to dual 2.5" pipes to 3" tips straight out the back. sounds good throughout the whole rpm range, no drone...
  14. LaurenMagnum360

    superchips programmer

    Hey everyone, So i just ordered a Superchips 3842 programmer for my 01 magnum 5.9 and currently I am getting 11.02 MPG combined. What has everyone's experience been with the programmer using an economy tune? BTW i do not have the deathtune from dodge, so i'm sure i wont see the GIANT power...
  15. LaurenMagnum360

    lifting next week

    So my original plan was to throw a 2.5" leveling kit on my truck and call it done. but the idea of the axle shift didn't sit too well with me, so i'm returning the kit to R/C and i have ordered a 5" R/C lift that will be here on wednesday. i also ordered all new bolts and cams for my upper...
  16. LaurenMagnum360

    off-road edition differences

    so I was curious about the front suspension on the off-road edition 1500s. how does it get it's 2.5 inch lift WITHOUT shifting the axle to the drivers side? does the off-road edition get a special track bar? or a factory drop bracket? anyone know?
  17. LaurenMagnum360

    4th gen 20" on 2nd gen

    So i'm watching a set of 2014 20" hemi wheels on ebay, and was wondering if they will fit my 2nd gen ram 1500? i'm assuming i should only need lug nuts.
  18. LaurenMagnum360

    stalling in reverse

    morning guys, so my truck has been stalling in reverse and I'm not really too sure.ohanwts causing it. so I'll break it down to when it happens, and when it doesn't. first thing in the morning stalls if put into reverse after starting. but drive works fine. same if the truck has been...
  19. LaurenMagnum360

    rough country leveling kit

    Hi guys, so i just ordered a rough country 2.5/1.5 leveling kit for my 01 Ram 1500 5.9L 4x4 just wondering if i had to get an alignment done after install? wondering because it's a solid axle and it seems like i will just push the entire axle down, unlike a IFS where it changes the camber...
  20. LaurenMagnum360

    oil cooler lines

    hi, i was wondering if anyone could post a picture of how their transmission cooler lines run? preferable a truck that has a factory auxillary cooler, along with the radiator one hooked up just like it is from the factory. Thanks :) 2001 Ram 5.9L 46RE if anyone cared...
  21. LaurenMagnum360

    transmission cooler line

    So guys, i picked up a 2001 Ram 1500 with the 5.9 the other day, and first thing i noticed is it has a brand new radiator, but only the external transmission cooler is hooked up. So i went to the dealer and bought the trans cooler hose, and the quick disconnect coupler... Hose P/n : 4883317ab...
  22. LaurenMagnum360

    Transmission auxillary cooler lines

    So guys, i picked up a 2001 Ram 1500 with the 5.9 the other day, and first thing i noticed is it has a brand new radiator, but only the external transmission cooler is hooked up. So i went to the dealer and bought the trans cooler hose, and the quick disconnect coupler... Hose P/n ...
  23. LaurenMagnum360

    radiator to aux cooler line

    Hey guys, I'm new here just picked up my first Ram. A 2001 1500 with the 5.9L well long story short, it has a new radiator and the dealer never hooked up the trans cooler that was built into the radiator, only the auxilary cooler, so i've decided i'm going to tackle that myself a fix it...

Latest posts

Members online

... and 5 more.
Total: 1,614 (members: 55, guests: 1,559)
Robots: 1,865

Forum statistics

Threads
195,636
Posts
2,872,784
Members
156,464
Latest member
RayMorrow44

Share this page

Top