Search results
-
Bilstein 5100 - truck measurement
You have the 2500 4x4? Likely the others are measuring 1500's -
How do you pull down the overhead console
It's tough. You've got to give it "you think it's going break" kind of pull. Pull from both rear corners equally. Pygmy -
Aux switch locations
Put mine between the front cup holders. Ram 2500 6.7l manual. Acrylic conceptions can also make a plate to cover the sunglass holder for switches. Pygmy -
-
14 laramie floor lighting
Mine. I tied into the dimmer light power from the console switches - orange /grey. Bought my led light strips from O'Reilly's $20 for two 10" strips. attached with 3M tape. Pygmy -
Custom Acrylic Conceptions mod...
The squishy rubber thing is what I measured and what I sent him. They come right out if you pinch one side, shrinking the upper circumference. They're probably the exact same. Pygmy -
Custom Acrylic Conceptions mod...
Pigeonman, the bottom of my 2014 Dodge Ram cup holders are 2.5" if you measure yours he'll make them to fit. No problem. Hope this helps. Pygmy -
-
Custom Acrylic Conceptions mod...
I'll check the diameter and let you know. I've been leaving mine on full power - cause they look great that way since it's just the design and sliver around the rim that lights up. Looks cool with a bottle of water at full power too. Glows with whatever color you have. Pygmy -
-
Custom Acrylic Conceptions mod...
These are only $55 per pair - any design. These were designed off the actual cup holder units I sent to acrylic conceptions from my '14 Ram 2500. Pygmy -
-
-
-
-
-
Custom Acrylic Conceptions mod...
Just installed my new led interior mod from acrylic conceptions. I was working on installing footwell leds when I saw what they offered for cup holders and other design mods and contacted them for my 2014 Ram 2500. They worked up these designs and can do just about anything. They are working... -
Dash Trim Removal
There was a screw in the back of my empty tray in my trim that had to be removed as well... 2014 Ram 2500 Pygmy -
Center Console Question
Highly recommend this: http://www.rammount.com/part/RAM-B-316-1-238U No drilling or modification to your truck and crazy solid. Then use the appropriate holder for your device. Pygmy -
Acc switch location on 2014 Ram Laramie
Switches are same as firemedic used in his linked thread. (SASQUATCH and Gator) Switch mounting hole is .830 by 1.45 inches. Panel Thickness Range 0 gaskets - .032, .062, .093, .125, .187, .250 inches 1 gasket - .030 to .109 & .147 to .157 Switch Depth switch only, no rear barrier - 1.479... -
Acc switch location on 2014 Ram Laramie
Thanks for the link firemedic. With my manual transmission my dash is layed out a bit differently. Pygmy -
Acc switch location on 2014 Ram Laramie
I'm working with Acrylic Conceptions on a LED mod and need to find a good location on the dash (or anywhere) to locate two accessory switches. Anyone done this yet... Found a good location with enough rear clearance etc.? Looking at the cubby above the 110v outlet but would need an... -
