Custom Acrylic Conceptions mod...

[Pygmy]

Just installed my new led interior mod from acrylic conceptions. I was working on installing footwell leds when I saw what they offered for cup holders and other design mods and contacted them for my 2014 Ram 2500. They worked up these designs and can do just about anything. They are working on two more disks for my rear seat arm rest currently. I tied into my accessory bar light power lead so that I can dim the leds along with my console lights - orange/grey lead. Wound up using plasmaglow led activator switches - one for footwell and the other for the disks. Here's what it looks like.

Wiring power


Pygmy

 

[Pygmy]

Footwell before


Pygmy

 

[Pygmy]

Footwell after

Pygmy

 

[Pygmy]

Front Acrylics


Pygmy

 

[Pygmy]

Rear Acrylics

Pygmy

 

[Pygmy]

From outside

Pygmy

 

[Disturbed]

Very nice. Have to keep this in mind when the money tree blooms this spring.

 

[Pigeonman]

Looks nice! Are the cup holder inserts the same as the ones listed on their site for the charger/challenger? Wonder if they'd fit my center fold down armrest on my 14'express? Should be some power in the armrest it has a USB charge line in it I think?

 

[Pygmy]

These are only $55 per pair - any design. These were designed off the actual cup holder units I sent to acrylic conceptions from my '14 Ram 2500.

Pygmy

 

[Pygmy]

[email protected]

Pygmy

 

[BlownGP]

Damn, that's pretty bad ass!!!!!!

 

[Fire Ram]

Awesome mod


Greater love hath no man than this that he lay down his life for a friend

 

[Pigeonman]

[email protected]

Pygmy

Thanks, I got in touch with them. Do you know the dimensions on yours? AJ was wondering if the 2500 holders are the same size as mine in my 14' 1500 Expess with the fold down centre armrest. I'm kinda doubtful that they'd be the same, but mine doesn't have removable inserts to send to him.

Also do think they would be too bright to run full power all the time? Accessing a dimmed power source in mine would be a major undertaking with no centre console.

 

[Pygmy]

I'll check the diameter and let you know. I've been leaving mine on full power - cause they look great that way since it's just the design and sliver around the rim that lights up. Looks cool with a bottle of water at full power too. Glows with whatever color you have.

Pygmy

 

[Pigeonman]

Awesome! Thanks!

 

[blackbetty14]

Pretty sweet! Even tho u stole my scree name and put it in ur cupholder. Copyrighted laws say to send me ur cup holders immediately!

 

[Pygmy]

Guilty as charged!

Pygmy

 

[Pygmy]

Pigeonman, the bottom of my 2014 Dodge Ram cup holders are 2.5" if you measure yours he'll make them to fit. No problem. Hope this helps.

Pygmy

 

[Pigeonman]

Pigeonman, the bottom of my 2014 Dodge Ram cup holders are 2.5" if you measure yours he'll make them to fit. No problem. Hope this helps.

Pygmy

Thanks man! I'll measure mine in the morning but I think they might be bigger than that... They have those squishy rubber things to hold the cup in. If they're bigger I have some Mikrosil casting material I can use to make a cast and send it to him.

 

[Pygmy]

Thanks man! I'll measure mine in the morning but I think they might be bigger than that... They have those squishy rubber things to hold the cup in. If they're bigger I have some Mikrosil casting material I can use to make a cast and send it to him.

The squishy rubber thing is what I measured and what I sent him. They come right out if you pinch one side, shrinking the upper circumference. They're probably the exact same.

Pygmy