I don’t have any pictures of the shavings... best thing I could say is when you drop the filter, dump it in a pan and use the flashlight on your phone. If you have sparkles swirling around then you may have an issue. If Your getting metal shavings on the plug, that’s no Good as well... it’s...
I also want to add I had been using MOBIL 1/0W-40 synthetic. I would not recommend using Mobil 1 as it does not meet the Chrysler cert and could be a cause of the lost lubrication of my lifters.... my research has left me with Pennzoil and AMSOIL are the only 0-40 that meets it. For now I’m...
The number 6 intake MDS intake lifter was also jacked up. Not seized like no. 8 but very playful. And the cam lobe was worn. There was some wear on the bearings from metal shavings. That’s why I have the crank polished. And replaced all bearings. I also plastigaged everything to check...
It all started with a slight tick...
I purchased my 2014 Ram 2500 6.4 Hemi in January of 2015. It’s been pretty reliable minus the first transmission going out at 36K miles (replaced under warranty no issues). And the shift solenoid pack going out at 96K miles (replaced under warranty no...
I’ve been using Mobil 1 since I bout my truck new in 2015. I currently have 118K miles on it. I just pulled the engine out due to multiple lifter rollers seizing and wiping the cam out. I’m going to do a full rebuild. I will make some YouTube videos on it. I will not be using Mobil 1...
I spoke with Procharger today about getting a kit for my 14 ram 2500 6.4l hemi. Nothing has been made yet, however there is talk about it. I submitted my info to be the beta test dummy. Has anyone done any power adders like this to their trucks?
Anyone do any Labor Day trips?
Just returned from a trip in the mountains of NY. 15.5 MPG at around 80 mph round trip. Truck bed was full and all seats occupied.
So I just ordered the mbrp 4 inch cat back exhaust and k&n intake. Just wondering if anyone has this setups do how they like it. My truck already has 2.5 inch dual straight pipes from the cats back. I'm curious to see if the intake makes any difference and if the exhaust sounds any different...
You can run a different oil sure. But over time because of the tolerances, you can affect longevity. If you put a different viscosity oil in you motor, it could essentially change your oil pressure reading. Which will in turn change your temp reading as its reaction to dissipate heat will...
The best thing you can do is follow the book specs. the mfg made it real easy and put 0w-40 full synthetic on the oil cap. At least mine is. If anything were to happen to your engine and you had the wrong oil in it. Then they may void your warranty. The tolerances on these new motors are very...
When I asked they just to led me an internal malfunction. My own diagnostic opinion is that it started as an electrical issue like a faulty or stuck solenoid. then from there the clutches began to burn up then burning the fluid up to the point where the trans just ate itself at that point
Well Im up in New Hampshire on vacation. So I called the original dealer that I took it to and told them what was going on and I explained that the fluid is burnt up. The service manager told me that I have a sealed trans unit because it's a new 8 speed. So then I politely told him I'm a vehicle...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.