Search results

  1. RAM_Designs

    To 87mm TB, or not to 87mm TB?

    Hey guys, been a while since I've posted here....I've FINALLY found someone local to install my ARH long tubes on my 6.4, it's the only real performance mod that I'm going to have done (aside from 4.88 gears). I'm not going to get a tuner, so with that in mind, since I have an easier flowing...
  2. RAM_Designs

    2016 RAM 6.4 TUNER OPTIONS?

    Well, I pulled the trigger on the ARH long tube headers, and I plan on getting an 85-87mm throttle body as well to get a little more intake velocity. I’m really not super concerned with getting the absolute most performance, more concerned about longevity and I mainly just drive highway miles...
  3. RAM_Designs

    Header options for 6.4L nowadays...AFE, ARH, OBX...anything else?!?

    Title says it all, looking for LT header options for my 2016 6.4L 2500.
  4. RAM_Designs

    Aftermarket shocks for PowerWagon suspension?

    Hey guys, looking for some insight here as it seems like there are just tons of options out there, with all kinds of different specs as far as what fits what, etc. I'm looking to replace my factory shocks soon (just something I do after 100k miles regardless). I'm wanting to get something that...
  5. RAM_Designs

    Noisy Fuel Injectors? Not any more...

    Having had both the 5.7L and 6.4L Hemi trucks, I know all to well about the noisy fuel injectors in these trucks and how annoying they can be. Well, I tried something new this morning...this stuff...
  6. RAM_Designs

    Longtubes on my 2500...do i have to get a tuner?

    I've read some mixed opinions on this... I've been eyeballing the ARH LT's (with cats) for my Ram, and the places I have looked at locally to install have really recommended getting a tuned to tweak stuff just right, get rid of any possible codes, etc. Pretty basic (kinda) question...is it...
  7. RAM_Designs

    Finally got my 4.88's installed!

    Well, after the shop having my truck for a week and running into a couple of issues with these Ram front axles, I have my truck back. Now for reference, I'm coming from the pathetic 3.73 gears while running 37" Nitto Terra Grappler G2 tires (36.6" actual when new). I have 55k miles on the...
  8. RAM_Designs

    Best Headers for RAM 2500 6.4L

    Looking for something to give me added torque and HP under 3500rpm or so, don't really care about WOT power at 4-5.5k rpms. It's kinda daunting trying to find something that works for our truck and what will or won't fit. What have you 3/4 ton guys used that you like? What are some LT options...
  9. RAM_Designs

    Matching front/rear diff covers

    Aside from PML and Mag Hytec, who makes matching covers for my 2016 2500 6.4l with rear sway bar? I currently have a PML cover, but haven’t been happy with how the set screws aren’t very...leak proof. I don’t get any dripping but the bottom of the cover has a fluid filmyness to it that...
  10. RAM_Designs

    Price Quote for 4.56’s...

    Seemed like a pretty straight forward deal, price seems about right to me...I’m going to ask to provide my own gear oil since I want to use Redline oils everywhere. Does anything seem off to you guys?
  11. RAM_Designs

    Heavy (ier) duty rear springs for 2500

    I currently have the Power Wagon suspension on my truck, but when I'm throwing 2k pounds in the back, it's sitting noticeably lower than the front...I had a set of Tuftruck rear springs on my 2014 1500, and loved them. My hesitation is that the Power Wagon suspension is a little higher than...
  12. RAM_Designs

    Speaker adapters, what fits best?

    Hey guys, I'm going to be putting some 6.5" Audison coaxials in the front and rear doors, which as you all know currently hold the stock 6x9's all around. I obviously need an adapter to run the 6.5's, so what adapters have you found that fits/works best for our trucks? I may just have to make...
  13. RAM_Designs

    ICI bumper installed (and grille)

    Welp, spent a good couple hours putting on the front ICI bumper. Looks great, right? Went to put on the rear bumper, and I'm missing a whole bag of install parts, so I couldn't get the rear one on. But...at least I got the front one on, and I Plasti-dipped this grille I picked up on OfferUp...
  14. RAM_Designs

    Debadged and loving it!

    Jeez, why did I wait so long to do this, looks sooo much cleaner. I'm thinking some flares will look better now as well. I have some ICI bumpers in the way, and a new all steel black grille as well...operation blackout is almost complete!
  15. RAM_Designs

    Smoked lights all around

    Ok, I don't want to buy any junk, so what's a good set of smoked lights for front/back/3rd lights? I imagine a decent set is going to run $500-600 for the whole set. I was perusing eBay but don't want to accidentally buy some junk.
  16. RAM_Designs

    Temps a little higher with new cover?

    So I put a new PML transmission pan on, as well as replaced the filters. With the stick pan I was getting readings around 168-172* once fully warmed up. After putting on the new pan, when cruising on the highway, I'm getting 177-179*. As soon as I get off the highway and into some stop and go...
  17. RAM_Designs

    WTB: Granite Crystal/Matte Black Grille

    Looking to replace my chrome grille on my 2016 Ram 2500, only looking for the a granite crystal or matte black one, thank you.
  18. RAM_Designs

    Show me your aftermarket bumpers!

    I need ideas, looking for something to catch my eye...show me what you got! (please?)
  19. RAM_Designs

    MS-12633 is NOT mandatory for warranty...

    Has anyone else noticed this in their "user guide"? For the 6.4L Hemi, it says right there: "...the manufacturer only recommends full synthetic motor oils that meet the API categories of SN. The manufacturer recommends use of PUP 0W-40 or equivalent Mopar engine oil meeting the requirements...
  20. RAM_Designs

    PML tranny pan for 66RFE

    Dodge Ram Transmission Pan, Extra Deep, 45rfe, 545rfe, 68rfe - PML After looking under my truck, it looks like I have plenty of room for the extra deep pan from PML that's 2" deeper overall compared to the stock unit. Everything under the engine/tranny is stock exhaust and I have probably 4"...
  21. RAM_Designs

    38" A/T tire?

    Is there such a thing? Everything I have been looking at seems to be a M/T, but I don't want all the highway buzz and short lifespan of a true M/T.
  22. RAM_Designs

    HD Helper Bags?

    Looking for some good helper bags for a 2016 2500 tradesman...just want to keep it from sagging so much when hauling a heavy load that might be too front loaded. I only have about 1.25" of rake at the moment, and with a heavy load last weekend it was noticeable lower in the rear...don't like...
  23. RAM_Designs

    DFW Gear Swap Shop

    I'm wanting to go from 3.73's to 4.56's in my 2016 HD 4x4. I'm looking for a reputable shop in the DFW area that has experience with Ram trucks and specifically the HD axles. Thanks for any and all recommendations.
  24. RAM_Designs

    Peeps with 37's and 4.56's, get in here!

    Ok, got some 37's put on with the stock 3.73's and it's a little too sluggish on hills for me. Even slight hills...with the 2" PW suspension and 37's, it's just too much hog to keep moving up minor hills without dropping a gear all the time. I lost about 2MPG going to the PW suspension and...
  25. RAM_Designs

    Single source for HD diff and tranny covers?

    Is there a company that makes all three covers by any chance? I realize that I likely will only need to drain and refill the front maybe twice in the entire time I won my truck, since I don't do any off-roading, but I plan on doing rear diff and tranny drains every 50k...which is every 20-24...

Latest posts

Staff online

Members online

Total: 1,074 (members: 36, guests: 1,038)
Robots: 1,738

Forum statistics

Threads
195,678
Posts
2,873,233
Members
156,537
Latest member
Outdoorsman1127

Share this page

Top