Search results
-
99 1500 5.9 has spark and fuel....no start. Stumped
The asd relay circuit, cam position sensor can cause this cause it has to me before. Last time it happened though I found a faulty ecu by doing the cluster test and it read no info on the cluster display and the scan tool. My crank position never throws a code when it fails either and causes...- nc bogger
- Post #4
- Forum: Engine & Performance
-
differential oil
When I rebuild my rear factory "anti-slip" diff I use use one extra clutch and take out one spacer on each side so it locks up better offroad. I use royal purple 75-140. It keeps my temps way lower and after talking on the phone with them a while back no friction modifier is needed with their...- nc bogger
- Post #21
- Forum: General Discussion
-
3" Stering Shaft Extension
Well thanks anyways. I didnt want to add anymore suspension lift and needed to get to my distributor and crank position sensor easier when on the trail so it works for me. I'll just weld the shaft after christmas.- nc bogger
- Post #3
- Forum: General Discussion
-
Transfer case
You can have a broke vac line or the diaphragm in the actuator on the front axle can get a hole wore into it.- nc bogger
- Post #6
- Forum: General Discussion
-
Transfer case
Theres an issue with the CAD if it doesnt drive the front tires and the front drive shaft is being driven in 4wd. Thats why I switched to a cable style CAD. Mine would disengage going through snow and cold water or even on cold days it wouldnt move the diaphragm far enough to engage the...- nc bogger
- Post #2
- Forum: General Discussion
-
Transmission issues... hope someone can help
I had the same issue a few years ago. I had a short where two wires pulled out of the trans connector just enough to touch each other. Theres a service bulletin on the od control solenoid which also has the temp sensor integrated into it. After the wires touched, it shorted my od solenoid and...- nc bogger
- Post #9
- Forum: General Discussion
-
3" Stering Shaft Extension
Anybody know the part number for a 3" steering shaft extension? Mines wore out and I rather buy another right now than weld 3" into my steering shaft. Daystar, who owns performance accessories body lifts now, wont sell me another out of a kit unless I take pictures if it and their stamp on the...- nc bogger
- Thread
- Replies: 4
- Forum: General Discussion
-
1997 ram 1500 4x4 having issues
I've had the plastic pads on the shifter fork in the transfer case wear out and cause symptoms like that. Check transfer case fluid level and the actuator on the front axle if you can. If its cold and the actuator gets stuck it makes hella noise rubbing the collar against the axle splines.- nc bogger
- Post #2
- Forum: General Discussion
Members online
- Wild one
- Doug5656
- Calicajun
- hodge-xj
- amadhi89
- Musky Mike
- jeff_rey
- 6speed4.7
- RamBat23
- Docwagon1776
- crackerjack1957
- hollyb
- CanuckRam1313
- dieseldave
- ClarkR
- Trail3n
- truck2014
- Ebattipi4a
- TC
- WY-Dave
- Heathen-19
- StansRam
- MGD81
- Tegas
- Mopar1987
- jknappen
- Randy Grant
- michaelcarlson2
- 04fxdwgi
- sigfla
- olyelr
- Roper46
- Ramfanski
- Ponyboy
- theamcguy
- VanillaRAM
- diymirage
- Billet Bee
- ZachG3500
- Daversport
- 4xdad
- dhonaker
- Dan1
- JW2 Innovations