Search results

  1. CoreyLRam96

    How to make the truck ride more smooth after lift?

    They are 3" shocks all around. And the lift method is drop spindles up front and blocks in the back Sent from my iPhone using Tapatalk
  2. CoreyLRam96

    How to make the truck ride more smooth after lift?

    I've recently lifted a 1996 Ram 1500 (2WD) and it does ride a little rough over bumps and I've definitely noticed I feel every bump in the road or imperfection of the pavement. Anything I can buy to get the trucks smooth ride back? I recently installed 3" Rough Country Shocks on the truck and it...
  3. CoreyLRam96

    A question about transmission

    Is the transmission on the 2nd gen ram trucks prone to going bad? I've been hearing rumors that it's prone to having a bad transmission. Is this true or is it all about changing the fluid? :confused:
  4. CoreyLRam96

    Wheel Fitment

    What exactly are you worried about? Sent from my iPhone using Tapatalk
  5. CoreyLRam96

    Help with De-badging!

    It looks like it either nicked the clear coat or scratched it, here's a photo of the wheel btw Sent from my iPhone using Tapatalk
  6. CoreyLRam96

    Help with De-badging!

    Sent from my iPhone using Tapatalk
  7. CoreyLRam96

    Help with De-badging!

    Tried it and ruined a small spot of paint Sent from my iPhone using Tapatalk
  8. CoreyLRam96

    Help with De-badging!

    Define not careful :( Sent from my iPhone using Tapatalk
  9. CoreyLRam96

    Help with De-badging!

    I'll give it another go with adhesive remover tomorrow, if that doesn't work I'll use the heat gun again. Other then that it's like really hard, old glue from 1996 lol Sent from my iPhone using Tapatalk
  10. CoreyLRam96

    Help with De-badging!

    So no adhesive remover on that? I used a heat gun on the sport stickers and they came off easily, these not so much. Sent from my iPhone using Tapatalk
  11. CoreyLRam96

    Help with De-badging!

    I've recently removed the RAM 1500 badges as well as the V8 badges, they left a thick, old black adhesive on the truck and I'm using GOOF OFF to remove the adhesive... it removed the "Sport" sticker residue fine but this stuff is thick and I'm not sure if it'll work. Sent from my iPhone using...
  12. CoreyLRam96

    Help with noise

    So it wasn't the belt or any of the pulleys. Sent from my iPhone using Tapatalk
  13. CoreyLRam96

    Help with noise

    Not a lot at all I'd say it's probably average Sent from my iPhone using Tapatalk
  14. CoreyLRam96

    Help with noise

    Hm they spin freely when I spin them but it isn't tight Sent from my iPhone using Tapatalk
  15. CoreyLRam96

    Help with noise

    So they shouldn't be able to be moved at all, only spun? Sent from my iPhone using Tapatalk
  16. CoreyLRam96

    Help with noise

    Any specific way I could check the bearings on all those? Sent from my iPhone using Tapatalk
  17. CoreyLRam96

    Help with noise

    Well i don't know what pulley could be out of alignment. All I know is I've replaced the tensioner and that didn't work. Replacing the belt didn't work. I'm replacing the idler today. But I don't know what pulley it could be rubbing on if any. Sent from my iPhone using Tapatalk
  18. CoreyLRam96

    Help with noise

    It could be a different pulley out of alignment because when we took off the original one, the other one had some white marks on it where it looked like it had rubbed on something Sent from my iPhone using Tapatalk
  19. CoreyLRam96

    Help with noise

    If it was the water pump or alternator wouldn't the water pump be leaking water out of a hole? And the truck battery is fine it's never been dead so I don't think it is my alternator but I can definitely check today if the idler pulley doesn't resolve my issue. Sent from my iPhone using Tapatalk
  20. CoreyLRam96

    Help with noise

    Yea but if there is one of alignment wouldn't it be very difficult to find if it's out of alignment by a hair? Sent from my iPhone using Tapatalk
  21. CoreyLRam96

    Help with noise

    I just replaced the tensioner and the belt, still squeaks. Last pulley to replace is the idler pulley. The belt is very tight as it should be but it has to be a pulley. Sent from my iPhone using Tapatalk
  22. CoreyLRam96

    Help with noise

    Do you think it might just be the idler pulley left? That's the only other pulley that could be going out that I haven't replaced. Sent from my iPhone using Tapatalk
  23. CoreyLRam96

    Help with noise

    So recently my truck has started squeaking from up front under the hood, It used to do it a few months back but I replaced the serpentine belt and the squeaking stopped for a few months up until now. The squeaking has come back I replaced that belt with an even newer one to see if that was it...
  24. CoreyLRam96

    Question about shocks

    What's the stock length of ram 1500 2WD shocks? Sent from my iPhone using Tapatalk
  25. CoreyLRam96

    Wheel spacers

    Were you thinking of BORA? Sent from my iPhone using Tapatalk

Latest posts

Members online

... and 16 more.
Total: 1,322 (members: 66, guests: 1,256)
Robots: 1,842

Forum statistics

Threads
195,633
Posts
2,872,766
Members
156,462
Latest member
Ram_R0d

Share this page

Top