Search results

  1. G

    I've bad ideas. Front Dana 60

    Those dana 60 HP king pin diffs go for a $1000 and up around here.
  2. G

    2wd steering box?

    Thank you.
  3. G

    2wd steering box?

    No one?
  4. G

    2wd steering box?

    Just got another 2wd 1500 truck here, is there any adjustment on these boxes to take some of the play out. I have been under the truck checking things over and all components are tight. But there is a lot of play at he steering wheel. Thanks.
  5. G

    Radiator?

    Ya thanks, I went back at it and found the fitting on the rad to be a bit loose. What a PIta.
  6. G

    Radiator?

    So I just swapped out my leaking rad for a used rad from the wreckers. It came with a 30 day warranty. My ? is I now have tranny fluid leak at the rad, is there also antifreeze in the tank or just fluid cause theres no antifreeze leaking out just fluid. I,ve checked the connections, the leak...
  7. G

    Ac comprssor?

    OK. Thanks guys. Its not very often I use the heat in this truck.
  8. G

    Ac comprssor?

    So now the cold weather is coming back and I used the heater for the first time in a long time. But my compressor keeps kicking in and out, what would cause that? Thanks.
  9. G

    2000 Dodge Ram 2500 Turbo Cummings Diesel

    Check the battery connections first.
  10. G

    Pics of your 2nd gen ?

    Heres both of mine.
  11. G

    M1 four-barrel?

    I got 1 a few weeks ago. Pretty rare item. And I really don,t care if I use it or not. it,s just nice to look at.
  12. G

    High idle, pretty stumped

    I am not understanding this, what did you adjust?
  13. G

    Pull engine to upgrade intake?

    No need to pull the engine. I,m tall like you, take the rad and shrould out. Then you can stand in front of the engine to do the job.
  14. G

    High idle, pretty stumped

    You guys have helped me lots getting my 3 1996 trucks running, I,m thinking. The iac you got isn,t good. Hard to say.
  15. G

    Changed the rad?

    Thank you.
  16. G

    Changed the rad?

    So I just installed a new rad, 5.2 with auto trans. So I,m wondering should I just start the truck and the resovoir in the rad will fill with oil? Also how much oil will I need to add. Thanks.
  17. G

    i blew my engine 95 ram 5.9l

    I would take the hood off, 4 nuts only. Instead of messing with the brittle grill shell nuts. Pita.
  18. G

    i blew my engine 95 ram 5.9l

    Putting the intake on in the truck is no problem, you will already have the rad and shrould out so you can stand in there.
  19. G

    M1 intake

    So now I need to fab a mounting setup for the throttle and TV cables. Also the stock fuel rail won,t work. Any ideas on that?
  20. G

    M1 intake

    So these bits came with the m1 also. This is how we had it set up on my friends truck before I got it. It worked really well in 2 barrel form with only long tube headers and cold air.
  21. G

    M1 intake

    I am starting with a budget of $3000. I,m thinking of having the stock heads ported and polishised. I already built the rearend with 410s, and have a trans cooler. Need to figure out the camshaft. Also picked up a set of 1.7 roller rockers. I bought this truck brand new and my daughter has here...
  22. G

    M1 intake

    I guess more info would be good. Its going on my 2wd shortbed. It, s a road burner won,t be towing anything. Thanks.
  23. G

    M1 intake

    So I got this set up today. Just trying to decide on what mods will be nessasary to make it work? Like camshaft or head work?
  24. G

    Spark plug wires with headers

    I used Allen head bolts on my headers, way easier to tighten.
  25. G

    Changing the fuel pump?

    So I have confirmed the truck has no fuel pressure. !996 with a 5.2. Its a short box 2wd.Just wondering if I could unbolt the bed and get enough clearance to change out the pump.The truck is very rust free so it will come apart without too much problem, I hope. Thanks for your help.

Latest posts

Members online

... and 10 more.
Total: 1,241 (members: 60, guests: 1,181)
Robots: 1,811

Forum statistics

Threads
195,643
Posts
2,872,847
Members
156,477
Latest member
djmwilliams11

Share this page

Top