Search results

  1. J

    Starting in the cold...

    Most #2 pumps dont have anything other than the #2 diesel signs on them so you have to ask, starting in October or Ill just get #2 if I fuel up at the truck stop because they go through the fuel so fast, but if I go to any not so busy smaller stations, I usually spend the cash for the #1 or...
  2. J

    Starting in the cold...

    like a garage? lol wish my truck fit in my garage :( my garage barely fits my tractor... or my wife's Subaru. Why would anyone waste the money building such small building, especially in the frozen north :confused:
  3. J

    Starting in the cold...

    I thought I read somewhere that you should be careful when using additives with winterized diesel because they can cause issues with the additives that are already in the fuel. Has anyone had this problem before? I mean... its on the internet so it has to be true right? ;)
  4. J

    Starting in the cold...

    no, not normally. The fuel around here says on the pumps "good to -20".... for #2 and #1 is even lower. Should i not trust them?
  5. J

    Starting in the cold...

    My coworker has a new duramax and you cant even hear it running... My truck is all stock but I really like how the cummins sounds too. I've owned 22 vehicles and this truck is by far my favorite! Now I get why everyone drives them to go get groceries :)
  6. J

    Starting in the cold...

    I've owned my new truck for about 6 months now and I have been impressed so far but this morning it was -2°f... after warming up from -7°f and I forgot to plug it in. Thought I would do a video as I was going to start it up anyways so why not... I am very impressed with how well this diesel...
  7. J

    HD Tire Pressure Monitoring System Reset

    Bought a new 2017 2500 cummins a few weeks ago and the dealer had inflated the tires to 80-85psi cold with nitrogen. When driving on the highway they would heat up to 90psi. This being my first HD RAM truck I didn't think much of it until I went over a local pass at 6500 feet elevation and...
  8. J

    Installing OEM backup cam

    Had the truck flashed today and everything works!! Thanks guys! I ended up only using the Y harness and the body harness ,plus 3 pins from the extra tailgate harness, I ended up Utilizing the body/IP connector instead of running the extra harness to the back of the radio. used some nice...
  9. J

    Installing OEM backup cam

    I had some time today to finish the install and so before I took the dash apart I wanted to see what kinds of pins are in the body/IP connector. As it turns out, they are the exact same pins in the tailgate connector behind the plate and under the bed. In some cases, this harness is extra, or if...
  10. J

    Installing OEM backup cam

    I get a free flash if i drive to the dealer I bought the truck from..
  11. J

    Installing OEM backup cam

    is it possible to plug the 3 camera wires into the back of the IP connector? I imagin i would different ends for the wires to fit that style connector.
  12. J

    Installing OEM backup cam

    yeah its a 2500 bighorn with the Cummins. i got the wires in but i had to cut the loom tape and windex it up to get it to slide in. what a joke... they make you pull all these extra wires through that hole for what reason? the yellow is only like 12 inches long and goes no where and the blue...
  13. J

    Installing OEM backup cam

    got the bastards in... I dont want to run all these extra wires and harness to the radio seeing how i already have the wires running to the back of the radio, Can i just hook them into the connector by the brake peddle?
  14. J

    Installing OEM backup cam

    I don't think it is possible to get the harness through the grommet. Stupid thing
  15. J

    Installing OEM backup cam

    Hey guys, my kit is being delivered today. Because this truck only has 100 miles on it and I want to make sure this install doesn't look like shit... What is the best way to tackle the install of the body harness so it looks professional and factory? I'm going to pickup some high grade fabric...
  16. J

    Installing OEM backup cam

    this looks like the same guy on feebay. but i get extra points if i buy on amazon... https://www.amazon.com/1500-Backup-Camera-Radios-Mopar/dp/B00OG7A40E/ref=sr_1_1?ie=UTF8&qid=1493146427&sr=8-1&keywords=oem+ram+backup+camera
  17. J

    Installing OEM backup cam

    PN 82214240 ? or is it different for the 2017? The local parts guy said it ended in AB... but the only one that i could find that ends in AB is the mirror one...
  18. J

    Installing OEM backup cam

    My luck ran out, there was the short extension that went to just 2 wires on the body harness... the 2 wires plug into the 8 and then plugs into another connector that has 8 wires going into the gate. Ill have to take the cover off tonight to get a picture of the inside. on a happier note...
  19. J

    Installing OEM backup cam

    I'll check to make sure the the 8 wire run the full distance at lunch. I had an excuse earlier to run home and snap the picture of the connector but forgot to see if the 8 wires ran the full distance. The salesman told me when I was test driving that the truck had the backup cam... and i...
  20. J

    Installing OEM backup cam

    it is sunny and I'm the dogs ass today!! Looks like I'm in luck!! :happy107: or am I looking at something wrong? On a side note.... dealership called me back and said 303 for the kit 250 for install unknown if flash is included... ... what a joke He told me the part number...
  21. J

    Installing OEM backup cam

    Ok... I almost took a picture of that connector too, dang... I'll check it at lunch, but when I was searching for the connector I think that plug had those wires. Maybe the sun will continue shining for this dog!
  22. J

    Installing OEM backup cam

    I don't see it
  23. J

    Installing OEM backup cam

    looks like I'm good on the body harness wires, there is only 2 spots open of the 10... I'm not sure what im looking at under the dash yet. I'll have to study the pictures and figure out the angle they were taken so I can locate the connector.
  24. J

    Installing OEM backup cam

    New to it all... Hi all. Just bought my 2017 SLT 2500 big horn yesterday and it came with the 8.4 uconnect but no backup cam and i really wanted the cam!! After reading tons of this thread I called my dealer and asked them if they could pull the wire schematics and check if its a quick...

Latest posts

Staff online

Members online

... and 9 more.
Total: 1,240 (members: 59, guests: 1,181)
Robots: 1,436

Forum statistics

Threads
195,840
Posts
2,875,120
Members
156,813
Latest member
johnanga13

Share this page

Top