Search results
-
Intake manifold 2012 5.7
It's 400 to the crank but probably 3something to the wheels They give those specs because it looks impressive The rwhp is always going to be less because of the transmission it has to go through aswell as the gears Sent from my LG-K210 using Tapatalk- Ndziy
- Post #12
- Forum: Engine & Performance
-
Intake manifold 2012 5.7
Headers are going to give you the most gains but as it goes for the cold air it will increase your throttle response a bit and add noise. As it goes for your spacer don't even bother. It's a 60$ paper weight lol and as it goes for HP you'll need alot more done to achieve that Sent from my...- Ndziy
- Post #9
- Forum: Engine & Performance
-
Intake manifold 2012 5.7
If you take it to the dealer just revert it back to stock and you should be ok. Because if they do updates and your tuner and your truck is married then you might have to send your programmer in to get fixed. Ooooh you'll need a new pcm that will be coming out of your pocket Sent from my...- Ndziy
- Post #7
- Forum: Engine & Performance
-
Intake manifold 2012 5.7
Now if you had a super charger. It you could tune it to pack more air in there Sent from my LG-K210 using Tapatalk- Ndziy
- Post #5
- Forum: Engine & Performance
-
Intake manifold 2012 5.7
The route I went on modding at the start was cai, headers, and a pro tune for the truck. It's nothing crazy but noticable aha. But if you go and put a 6.1 intake on it won't give you any gains and in most cases you'll just end up switching back Sent from my LG-K210 using Tapatalk- Ndziy
- Post #4
- Forum: Engine & Performance
-
Intake manifold 2012 5.7
From what I've heard about the intake manifold is that a few guys have bolted a 6.1 manifold to it but they were running and SC you are better off running your stock manifold it will run alot smooth and you won't lose low end torque. That's for if it's naturally aspirated and sort of boost you...- Ndziy
- Post #2
- Forum: Engine & Performance
-
Got The Recall Notice
Ask "the technicians" at dodge... Sent from my LG-K210 using Tapatalk- Ndziy
- Post #54
- Forum: General Discussions
-
Don't have sex on the fold flat floor
this thread was gold. but i've been back there a million times and nothing ever broke... except when i slipped out and slammed into the cup holder -
Headers. Will they work?
if you are patient and have a bit of mechanical aptitude you can find that bolt and drill it out enough and get a left handed drill bit to catch the hole you just drilled and it will come out easy peasey!!! but for headers i got the long tubes and they are a big difference in sound and...- Ndziy
- Post #13
- Forum: Engine & Performance
-
Been a while
I would leave it as is. Maybe if you had 20s with a bit more side wall you could pull it off but idk about the 22s it looks unreal as is Sent from my LG-K210 using Tapatalk- Ndziy
- Post #9
- Forum: Member Trucks
-
Got The Recall Notice
My friend who works at dodge just just did the "inspection" they do at the dealership when they check for the recall, when we were at coffee the other night and they just yank on the seat belt to make sure it locks up. so you can say mines done:roflsquared::roflsquared::roflsquared:- Ndziy
- Post #52
- Forum: General Discussions
-
65RFE need some tips
Well mind you that's not a bad idea but if I was going to swap to a 66 I would just drop more clutches and boost the line pressure in the 65 pretty much get the same thing Sent from my LG-K210 using Tapatalk- Ndziy
- Post #15
- Forum: Engine & Performance
-
65RFE need some tips
And where are they located Sent from my LG-K210 using Tapatalk- Ndziy
- Post #7
- Forum: Engine & Performance
-
Thinking about buying a ram... What to watch out for?
Always nice to know who the previous owner was hence buying private. That being said I purchased my 2013 ram from a dealership and the previous owner was the secretary of the dealership. I asked why there was so many miles on it for only being a year old but this was because she lived in barhead...- Ndziy
- Post #4
- Forum: General Discussions
-
6.4 Hemi Fuel System
See this is exactly why people choose independent shop as opposed to the dealer... Like that's a load of horse poo lol I remember they changed my oil when I first bought my truck and since they took my tires off they asked me to come back after 80 clicks to get my tires re torqued. So me at this...- Ndziy
- Post #11
- Forum: Heavy Duty
-
Ground force coils cut for 3/5
Oh ok well that's good. Well I will forsure let you know where everything is at and you said you were in Calgary? Sent from my LG-K210 using Tapatalk -
Ground force coils cut for 3/5
That looks really good is that with 275 55 20s? And I thought they pulled the tires inward by none the less it looks good Are they still on the truck and how long were they on the truck for Sent from my LG-K210 using Tapatalk -
Ground force coils cut for 3/5
I will have to check into it and keep in touch with you. And won't those spindals suck my tires in on the front?? I kinda want to keep that tire poke with my stock rims Sent from my LG-K210 using Tapatalk -
Ground force coils cut for 3/5
Well the fronts are tangential and closer together, and when the truck is under load the top 4 coils are touching each so I'm assuming the spring rate won't change Sent from my LG-K210 using Tapatalk -
Ground force coils cut for 3/5
Hey guys I've read threads on threads over the 3/5 drop on the 4G now that I have my 2/4 drop I'm looking at dropping to a 3/5 which means I'll have to cut. I want to know if there is a certain trick to cutting them so I can get it on the first shot. With my chev I had it worked out a certain... -
Stubby antennas?
I'll see what they got. And it's just a universal right? Or is it specifically for dodge Sent from my LG-K210 using Tapatalk- Ndziy
- Post #12
- Forum: All Mopar Parts
-
Truck is paid off, now your advice is needed for the fun mods
if you are looking into performance look at a diablo tuner with the hemifever tune. you will smile i promise.. as for sound if you want low end torque and a nice growl look at short tube headers (i've got longs on mine they are unreal) they open the truck right up and the hemi tick isn't very... -
Stubby antennas?
I am in the city. Maybe I'll try that and hopefully it'll work out because the cheaper universal one from Canadian tire I got was not very good, lol the satalite radio cut out even more than before but the radio was not bareable. But thank you for the direction good sir Sent from my LG-K210...- Ndziy
- Post #10
- Forum: All Mopar Parts
-
2017 QC Sport Build
Im really liking the wheel set up on that truck. they look good not too busy and they look solid- Ndziy
- Post #6
- Forum: Member Trucks
-
Stubby antennas?
How did the one off Amazon work? Do you still get good reception? Sent from my LG-K210 using Tapatalk- Ndziy
- Post #8
- Forum: All Mopar Parts
