Search results
-
T
Parking sensor help on aftermarket bumper
I've never heard of the sensors needing to clocked to a set orientation. I replaced my rear bumper years ago, which included rubber grommets and everything just worked the first time. -
T
Parking sensor help on aftermarket bumper
I installed an aftermarket front bumper, but reused my existing parking sensor harness and sensors. The problem I'm having is only some of the sensors are not faulting. I've moved the sensors around between working and not working plugs, but can only ever get 3 at most to not error out. S1 and... -
T
New Havoc Steps
I've been using them for almost 2 years. The finish can flake off over time. -
T
Anyone try Modifystreet headlights?
Ok another question someone mentioned using 9005 in these, is that true? I haven't found the base comparison between them. Only issue I have found is I might have a DOA bulb in one of my high beams, and this might be causing a hyper flash without actually giving me a bulb out warning. Or at... -
T
Anyone try Modifystreet headlights?
I got my Gen2 installed with the conversion cable for my factory projectors. My question is do I need Alfa to run LED or HID or are they just drop in? And what's the high beam bulb type? I've seen H1 and H7 listed for them. -
T
Anyone try Modifystreet headlights?
Is it easiest to all Alpha directly to place an order if I want the V2 with the conversion cable? -
T
Anyone try Modifystreet headlights?
Jimmy07 - Can you send a finished picture of this harness? I would love to copy this but wanted to see it before ordering everything. Thank you -
T
Just installed sylvania zxe bulbs in projector
I've been running these on my lows and fogs until I can decide what I want for an upgrade. -
T
Upgrade for factory projectors (Non XBs)
Looking to see if anyone has seen an upgrade to 5th Gen style for truck with factory projectors, Not XBs. -
T
Im going to fab up a bumper.
Well, since at some point over the winter someone backed into my truck and bent my chrome oem bumper and broke the fog light housing on the passenger side. It time to look for a new bumper. I really liked the GoRhino but they don't offer sensor holes. So I started to really to really look at the... -
T
Happy with Hankook Dynapro HT ?
I replaced my OEM tires at 28k with these. This is the first winter I didn't feel like I was skating on ice all the time. I have about 8k on them without any problems. -
T
Goodyear Tire Question
Even with rotating every 5000, I'm going to be lucky to see 30k on my oem GY. They'll be replaced before another winter. -
T
Storage Containers for use in Truck Bed
I use two of the Home Depot Husky 45 gal containers with latches and wheels. https://www.homedepot.com/p/Husky-45-Gal-Latch-and-Stack-Tote-with-Wheels-in-Black-206133/303099671 -
T
Does this spacer look right?
I just put in 2" MotoFab spacers, and they definitely go on the bottom, and they fit flush. -
T
Smittybilt M1 Front Bumpers
They show two different bumper styles for the RAM 1500 P/N# 612808 So I finally found a demo vehicle showing the other style with cubes vs. round fog lights. http://www.dsicustomvehicles.com/ram-commando -
T
Smittybilt M1 Front Bumpers
Anyone have any experience with the M1 bumpers from Smittybilt? Looks like the frame and winch mount plate as one piece, with the bumper with modular fog lights and lightbar as a 2nd piece. There's a local shop with a demo for sale. -
T
My leveling story.
After owning my 2017 CC for almost a year decided it's time to level her. I went with the 5100s and Mevotech UCAs. I had a rake of over 2.5". So I wanted to set the 5100s at 2.8". About a month went by before I could find time to do the install. During that time I added an ARE topper and built a... -
T
How to Upgrade your factory LED rear dome light
What panels are everyone using for this?- tator2k
- Post #18
- Forum: 4th Gen DIY
-
T
Topper opinions
I did purchase the ARE one. Now I need to find a place to grab the wiring harness for the lights and keyless entry. Really couldn't get a deal on the price. Especially since the guy did hold it for me but had a whole list of people chomping to get it. I now have the Christmas truck. Dalmonico... -
T
Topper opinions
So I've been in the market for a topper for my 2017 crew cab and locally used ones are really hard to find. Finally I was able to track down two, to look at, one black and red. First I found and actually bought a 2011 black aluminum topper that has manual locks, carpeted roof with... -
T
Spec-D Offroad Bumpers
They're also listed as: Barricade Extreme HD Front Bumper. Except they list it as 5/32. -
T
Spec-D Offroad Bumpers
Their support email response, after asking them material thickness: Contact our vendors we don't deal with customers directly. -
T
Borla Muffler Install Pics and Video
Mine was an open box and on sale when I found it. And I have a good welder.- tator2k
- Post #42
- Forum: Engine & Performance
-
T
Borla Muffler Install Pics and Video
I just got mine installed. We welded on reducers down to 2.25 on the outlet and then only needed 12" extension on the 3" inlet side. Sounds amazing.- tator2k
- Post #40
- Forum: Engine & Performance
