Search results

  1. E

    Nv4500 conversion and go fast goodies

    So After i blew my Auto Trans i wound up ordering Comp Cams Magnum Double Roller Timing Set Harland Sharp 1.7 Rockers Hughes/Edelbrock Airgap Intake (bought on craigslist for $200 :) ) Mopar Performance Cast Aluminum Valve Covers Fastman Throttle Body GMB High Performance Water Pumps AMS...
  2. E

    HELP BRake Problems!!!!!!

    alright im gonna try and get my hands on another one and see if thats the problem :/ thank you for your help i really appreciate it!
  3. E

    HELP BRake Problems!!!!!!

    i just tried it and nothing the pedal still goes to the floor, could it be the brake booster itself?
  4. E

    HELP BRake Problems!!!!!!

    ok so i replaced my ball joints and then i got back in the truck to test drive it and my pedal went to the floor brakes still worked but i had to slam it to the floor and it took a good 3 seconds to stop. I replaced a possible seized caliper, the master cylinder (i bench bled it first to get all...
  5. E

    6 speed trans

    so im just about to do the conversion in my truck, i built a 5.9l motor and bought an nv4500 with all the interior parts and redid fluid, clutch and flywheel. basically once you have the transmission you will need a different driveshaft because the lengths do vary. Any machine shop should have...
  6. E

    Transmission swap-possible?

    you will need this stuff too and as for the hole in the floor if you buy a parts truck you can make a template. to be honest if you buy a parts truck you will be able to get all the things you want, part out the rest and then scrap it. That will basically pay for the transmission swap. Ps the 6...
  7. E

    Transmission swap-possible?

    so im just about to do the conversion in my truck, i built a 5.9l motor and bought an nv4500 with all the interior parts and redid fluid, clutch and flywheel. basically once you have the transmission you will need a different driveshaft because the lengths do vary. Any machine shop should have...
  8. E

    Amsoil questions

    does anyone know if i can use the ams oil syncromesh in my nv4500?
  9. E

    Flowmaster or magnaflow

    long story short magnaflow = performance/some sound (imo) flowmaster = sound/ but less performance however i kind of cheated an got the best of both worlds, hollow out the cat and drop in a super 10. It sounds like really toned straight pipes, but its bound to get you a...
  10. E

    Nv4500 conversion and go fast goodies

    So heres an update, since my motor has 170k on it i went on a 6 hour road trip to buy a 96 5.9 360 with 59k miles on it :) and now ive ordered Comp Cams Magnum Double Roller Timing Set $46.99 Comp Cams 2103 Comp Cams Magnum Double Roller Timing Sets Harland Sharp 1.7 Rockers $349.95 Harland...
  11. E

    Nv4500 conversion and go fast goodies

    haha i would love to do a cam and heads but my budget for the overall project is $2500 and after all those parts plus drive shafts and misc parts, im probably going to go over budget, but at least im trying to buy all the parts while everything is still in the truck. but one of my main questions...
  12. E

    Nv4500 conversion and go fast goodies

    bump
  13. E

    Hey boys from CT

    diggin that 2nd gen, welcome to the forum
  14. E

    Nv4500 conversion and go fast goodies

    also it is an 01 ram 2500 5.9 360 4x4
  15. E

    Nv4500 conversion and go fast goodies

    thank you! :) ive been saving and budgeting for months and now ive finally saved enough for it along with some other misc things that will be needed, im hoping to do it at the end of april maybe early may. the nv3500 swap only took me and my buddy 30 hours and that was with having to pull the...
  16. E

    Nv4500 conversion and go fast goodies

    alright so after swapping in an nv3500 into my buddies ram 1500 i am thoroughly convinced automatic transmissions should have never been invented haha there is much more power released and even better gas mileage. So i went 3 hours west to pick up the transmission, bell housing, t-case, master...
  17. E

    suggestions?

    bump
  18. E

    "Daisy's" build (pic heavy)

    haha i hear yah i was really nervous to put it on and it took a day or two for me to really like it and thank you!
  19. E

    help! truck is way to hot

    bad tstat?
  20. E

    suggestions?

    alright so ive tackled a good part of this list and got a little side tracked but this is what im hoping to do and slap it all behind an nv4500 conversion. but my question is will all these parts work and work with my current mods? any help is much appreciated. SCT XCalibrator 2 Programmer...
  21. E

    "Daisy's" build (pic heavy)

    alright so i bit the bullet and bought the glowshift gauges setup, along with a filter adapter. they were an absolute ***** to wire, but in the end so worth it. i also picked up tow mirrors off a parts truck i bought, along with finally installing the visor. Then i bought ebc greenstuff pads...
  22. E

    manual transmission question

    haha yeah thats what i was thinking so now ive been scouring craigslist for one in the 2k range bc anything past that its not really worth it for me
  23. E

    Muddy truck thread

    alright i havnt been since ive done all my new work, buttttt
  24. E

    manual transmission question

    bump
  25. E

    manual transmission question

    Long story short I'm very tired of automatic transmissions and im looking to do a 5 speed swap. Ive already done one in my buddy's 97 ram 1500 5.2 318, but my question is with the engine mods I have and plan on doing ( SCT XCalibrator 2 Programmer,Harland Sharp 1.7 Rockers ,Fastman Throttle...

Latest posts

Staff online

Members online

... and 7 more.
Total: 1,330 (members: 57, guests: 1,273)
Robots: 1,401

Forum statistics

Threads
196,259
Posts
2,879,859
Members
157,450
Latest member
BSiers

Share this page

Top