Guys I need help. I replaced my hub bearing assembly yesterday on my 04 Ram 1500 4x4. Before I ordered parts I went to the dealer an inquired as to whether I had 2w or 4w ABS. according to the VIN # my truck is 4 wheel disc, rear wheel ABS. I did have some sort of sensor coming the driver side hub, following the brake line up into the fender wheel. But only on the driver side. I was told this was a tone ring, and should not matter whether the replacement hub had the sensor or not, since my truck was not programmed for 4w ABS. So after replacing the hubs yesterday and installing one that did not have a sensor, I had a check engine light come on for a Trans Axle Sensor or something to that affect. What kind of sensor is that and should i re order the hub with an ABS sensor? Also while replacing the hubs I also did brakes all around. While test driving I slammed the brakes on and locked the wheels up. As I took off again the check engine light came on w/ Previously stated codes and the truck would not start off in 1st gear, only second and shifted through all others fine. After restarting the truck the issue resolved itself. Is this related to the Hub sensor?
Last edited: