Rumble Ram
Junior Member
- Joined
- Dec 5, 2014
- Posts
- 8
- Reaction score
- 1
- Ram Year
- 1999
- Engine
- 5.9 360ci Gas
Hello, i am new to the whole forum thing so forgive me if i am not posting in the correct spot. I have an issue with my transfer case that has been boggling my mind, and any help would be greatly apperciated. So, i recently had my trans rebulit and gears swapped from 3.55 to 4.56, and i picked up the truck and my manual 4wd lever is not right. So the stock lever( see picture/attachment) reads, 4wd lo, N, 2wd, and then 4wd hi (going from dash back too the seat), the problem is that now the position that is suppose to be 4wd hi is now 2wd and vice versa, but 4wd lo and N are the same as before. When i give it some gas after a stop sign it pops out of 2wd. The 4wd light on the dash comes on in 4wd hi but only sometimes in 4wd lo but engages both. Could he have hooked the linkage up wrong or could it be some kind of adjustment? Any ideas/help? Please see picture. Thanks.