2000 dodge ram 1500 project

[Bubs]

Holy **** Garry

 

[dodge dude94]

*******

 

[1SilverBullet2]

I had the same amount of fun cutting out my control arm bolts lol

 

[Crocdocs]

I had the same amount of fun cutting out my control arm bolts lol

Haha It didn't take long to snap the bolt when I figured I'd put the jack under the ratchet lol. Then just tapped it out

 

[1SilverBullet2]

Haha It didn't take long to snap the bolt when I figured I'd put the jack under the ratchet lol. Then just tapped it out

Mine just kept spinning, even with an impact. So it took me about 4 hours total to cut 4 bolts out with a sawzall. That was the least favorite thing I've ever done to my truck.


Sent from the howitzer

 

[Crocdocs]

Mine just kept spinning, even with an impact. So it took me about 4 hours total to cut 4 bolts out with a sawzall. That was the least favorite thing I've ever done to my truck.


Sent from the howitzer

Wrench on the backside?

 

[Crocdocs]

Got it ripped out literly lol. With all bolts out and track bar disconnected I used a cumalong to pull it forward off of the control arms. Like a BOSS hahahaha
I wish I had this flex tho

 

[1SilverBullet2]

Wrench on the backside?

Yeah I was holding it on both sides. Bolts were just that corroded. After I got them to bust loose a bit they just spun in the arms.


Sent from the howitzer

 

[Bubs]

Nice, atleast you got her out of there

 

[Crocdocs]

Bent, right side is upwards from the left

More bent when you really look

And I don't know what the **** happen to the carrier. I still have to pull it everything still spun smooth but there was shaving in the oil and these grooves out of the carrier. I think the bent housing caused it to wobble and hit the back of housing or something

 

[Bubs]

Shouldn't have jumped her bud hahaha

 

[Crocdocs]

I never did lol

 

[Bubs]

I'm messing with ya bud, I know you're not that ****** hahaha