2014 1500 lift

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

14stormtrooper

Junior Member
Joined
Jun 17, 2015
Posts
25
Reaction score
3
Ram Year
2014
Engine
5.7 hemi
So right now my 2014 ram CC is leveled at 2.8 with the bilstiens on 20x12 fuel mavericks with 33s. Im looking to up grade to 35s ethier keep the same rims or go 22x14. I want to run the 6inch zone lift. Wondering if anyone hoas any reviews on it would greatly appreciate it. Also has anyone upgraded sways bars / ball joints and tie rods to aftermarket ones? If so which ones thanks for the help
 

brandonjansen

Senior Member
Joined
Feb 14, 2013
Posts
1,701
Reaction score
1,013
Location
Abbotsford, BC, Canada
Ram Year
2012 Ram 3500 Laramie Limited
Engine
6.7 Cummins - Tuned and Deleted
The Zone 6" kit is one of the most popular lifts run on the 1500's. Tons of guys running it with no issue at all. You'll want to get the 5" rear coils with the kit and run your Bilsteins at 2.1" to level it out. 2.8" if you want to clear 22x14's.

No real need to upgrade the sway bar or tie rods on a 1500. You could run Zone or Movotech upper A-arms if you wanted to. It won't be necessary with the Bilsteins at 2.1" but if you want to bump them up to 2.8" then wouldn't be a bad idea.
 

Drummin4jc

WWG1WGA!
Joined
Feb 3, 2015
Posts
2,375
Reaction score
1,218
Location
SW Pennsylvania
Ram Year
2024 Ram 2500 CC
Engine
6.4 Hemi
Got my Zone kit(s) sitting in the garage waiting to be installed now. :D. 6" suspension and 1.5" body.

Adam
 

Drummin4jc

WWG1WGA!
Joined
Feb 3, 2015
Posts
2,375
Reaction score
1,218
Location
SW Pennsylvania
Ram Year
2024 Ram 2500 CC
Engine
6.4 Hemi
So right now my 2014 ram CC is leveled at 2.8 with the bilstiens on 20x12 fuel mavericks with 33s. Im looking to up grade to 35s ethier keep the same rims or go 22x14. I want to run the 6inch zone lift. Wondering if anyone hoas any reviews on it would greatly appreciate it. Also has anyone upgraded sways bars / ball joints and tie rods to aftermarket ones? If so which ones thanks for the help

Have a look at this thread... http://www.ramforum.com/f40/7_5_lift_35s-80262/

He has a Zone 6" lift on his rig with 35's. Might give you a great reference.

37s right?

IMO

Yea Austin, 37x13.50's for mine.

Adam
 

Freed127

Senior Member
Joined
Apr 3, 2015
Posts
233
Reaction score
261
Location
Tamaqua PA
Ram Year
2014
Engine
5.7
12 wide might work, im thinking 14 would deff be close
 
Top