4th Gen Dyno Thread!

[badvik]

That must be dynojet simulated numbers but either way you gained 70whp

It is a Dyno Dynamics stand. But anyway, i agree, the dyno is just a tool to measure the gain, changes, to get a fine tune etc., but not to get the absolute numbers.

what truck do you have? all i see is '13 laramie. is it a CCSB 2wd? also im reading 393whp / 350 wtq?

My truck is 13MY laramie crew cab, 8sp, 3.21 GR, 4*4.

 

[DiabeticKripple]

updated

 

[DiabeticKripple]

bump

 

[THETANK]

mine has 8760hp and 8890ft lbs of tq. I runs like the wind, I should say I am way over medicated though so my numbers may be off a wee bit

 

[DiabeticKripple]

btt

 

[VB712]

Bringing an old thread back

2014 CC 4wd with 20x12 wheels and 3.21 gears. 90 degree day

374rwhp

Vararam, stock TB, ARH cattless long tubes, magnaflow muffler and DTP racing dyno tune on 93 octane.

 

[RedSRT4Me]

Bringing an old thread back

2014 CC 4wd with 20x12 wheels and 3.21 gears. 90 degree day

374rwhp

Vararam, stock TB, ARH cattless long tubes, magnaflow muffler and DTP racing dyno tune on 93 octane.

Checking out some of the dyno charts, I'm definitely getting heads/cam. Bring the power band to 6200ish rpms

 

[customcarz973]

Customcarz973, 403 whp / 551 wtq, 2016 4WD CCSB, TK (on 5psi low timing.)

 

[customcarz973]

That's bumping up against the max tq. spec for the 8spd

What do they say the limit is? im at 550tq to the wheels (on 5psi and low timing) now im at 8psi, and full timing, I should be in the 620-640 range at the wheels now, and I scoot along just fine. *crosses fingers, knocks wood.*

 

[RedSRT4Me]

What do they say the limit is? im at 550tq to the wheels (on 5psi and low timing) now im at 8psi, and full timing, I should be in the 620-640 range at the wheels now, and I scoot along just fine. *crosses fingers, knocks wood.*

Wikipedia states the Chrysler version of the 8HP70 in the Ram 1500 is good for 516tq

*that's what I get for speed reading and posting while at work

https://en.m.wikipedia.org/wiki/ZF_8HP_transmission

Click the link to read more

 

[6.7CumminsDrvr]

700 newton meters which = 516 lb/ft

 

[RedSRT4Me]

With that said this is exactly why I'm gonna stay NA. FBO heads/cam should max the tranny out.

I know myself too well and low boost will turn into high boost

 

[customcarz973]

Well, I dont know how much torque it takes to blow an 8HP70... But I know how much im going to use.