Ramstone2019
Junior Member
Any knowledge where to get 40.1 for UAS?Same...I also have a successful report from someone who loaded the UAS update. Only change there was they lost performance pages. I'm not sure if he ever got them back.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Any knowledge where to get 40.1 for UAS?Same...I also have a successful report from someone who loaded the UAS update. Only change there was they lost performance pages. I'm not sure if he ever got them back.
PM sent...Any knowledge where to get 40.1 for UAS?
Did you need to "side load" the nav pages again? (i'm downloading it right now, so haven't had a chance to open it up yet.)I did and 0 issues to report so far.
I have not attempted any map updates.Did you need to "side load" the nav pages again? (i'm downloading it right now, so haven't had a chance to open it up yet.)
When I did the 39.6, I had read somewhere that UAQ needed to add a map file. Latest I had seen was from I think the 22.4 file, which has a date of 2017. (I still had the flashdrive setup for 39.6, so I just swapped the VP4R folder, leaving the map file directory alone.)I have not attempted any map updates.
When I went to 40.1 the performance pages were goneI installed 40.1, with the map file I had still on the drive from 39.6. Loaded fine, even doing it while driving on the highway (again...)
I'll be honest, I don't think it changes anything, but I know the NHTSA thing was for a "glitch", so I'm happier to have it than not. Did see Performance Pages for the first time, although I still have my Rebel configured as a truck, not a challenger/charger. (Tried it once, and saw the fuel gauge do weird crap, and got scared.)
I have a 2019 Ram 1500 with the uconnect 12. I cant get at&t wifi and from what I've read to get it to work so I can actually create an account to get wifi in my truck, I need to have software version 40.1. It looks like my current version is 21.03 and I need to create 2 update USB drives to do so. Can someone tell me if this is in fact correct and if so where do I find the files to create the update usb drives?
It's my understanding that you need to be inI just have a few quick questions...
I have Application Version: CANADA-ASO-8.4-JR-30.24.0-20191016-J0HQ installed right now on my 2020 RAM 15 Classic (Warlock). If I wanted to upgrade to 40.1, would I have to apply the previous updates between 30.24 and 39.6 before applying this update? (30.24->34.2->39.5->39.6) Can I upgrade from 30.24 to 39.6 directly, then upgrade to 40.1?
Is it also "safe" to use these updates over Canadian version of this software/firmware?
Thanks!
According to the TSB, the minimum firmware is 22.64 so you should be able to go straight to 40.1I just have a few quick questions...
I have Application Version: CANADA-ASO-8.4-JR-30.24.0-20191016-J0HQ installed right now on my 2020 RAM 15 Classic (Warlock). If I wanted to upgrade to 40.1, would I have to apply the previous updates between 30.24 and 39.6 before applying this update? (30.24->34.2->39.5->39.6) Can I upgrade from 30.24 to 39.6 directly, then upgrade to 40.1?
Is it also "safe" to use these updates over Canadian version of this software/firmware?
Thanks!
Thank you so much for the info!According to the TSB, the minimum firmware is 22.64 so you should be able to go straight to 40.1
Edit: From the TSB "At or above 22.64 and under 40.1 >>> The radio will only need one USB update" The TSB posted is for UAQ/UCQ radios but I believe the UAS/UCS reads the same (just can't find it).
Edit 2: UAS TSB reads similar https://static.nhtsa.gov/odi/tsbs/2023/MC-10231777-9999.pdf
I do it with the engine running but typically it only needs to be in run. I also try not to enter or exit the vehicle after starting and if I'm going to sit in the truck I do it from the passenger seat (the USB harness is under the driver's seat and mine can be touchy sometimes).Thank you so much for the info!
Just to confirm (since I’ve never performed an update before), does the ignition key have to be ON (engine running) or just turned to the RUN/ON position? (or can it be done while only turned to accessories only?)
Thanks again!
According to the TSB, the minimum firmware is 22.64 so you should be able to go straight to 40.1
Edit: From the TSB "At or above 22.64 and under 40.1 >>> The radio will only need one USB update" The TSB posted is for UAQ/UCQ radios but I believe the UAS/UCS reads the same (just can't find it).
Edit 2: UAS TSB reads similar https://static.nhtsa.gov/odi/tsbs/2023/MC-10231777-9999.pdf
First of all I'd like to give a shout out to @Lurker55 for providing the ram UAQ 40.1. Here is the link to his v40.1 UAQ zip file.
UAQ Firmware - Google Drive
drive.google.com
... I have personally installed all three of these on my Compass/Cherokee and RAM UAQ radio and all functionality including SiriusXM, Navigation, CarPlay, backup camera, etc. all work with zero issues.
Here's the link to all of those v21.9 to v39.x files:
https://drive.google.com/drive/folders/1Uc6gYueoqOdCo93y3FgaMiZFSBmPKSE6?usp=sharing
NOTE: If you download any of these files and use them on your own radios and damage your device, I'm not responsible. However, I have updated and downgraded my radios with these files and have had zero issues.
I hope this can help others to fix their radios or just tinker!
Thanks for all the info!Thanks for the Links SnK. (I need to update Mom's UAQ with missing map database files from v22.60 to v40.1)
and From post 1...
UCQ is the Canadian version of the UAQ (American). If your truck was sold for the Canadian market and you are in Canada you'll want the UCQ version. I think I have it if you need it, just PM me.Thanks for all the info!
I've seen others mention adding missing map database files when performing these updates. Where would one find these updates? I've searched and haven't had any luck.. seems like my map database is currently PROD_2019.03.28_MY20_CW13_LUNA_CONTENT_NA | Content_NA_HM_18Q2. (updating the maps isn't a high priority as I typically use CarPlay/Waze anyways )
Also, when I was chatting with Lurker55 and while ago, he said my VIN number shows I should (I'm guessing) be using files for UCQ model? I'm not too sure what that means.. so I figured I'd ask! (current version is: CANADA-ASO-8.4-JR-30.24.0-20191016-J0HQ)
Will UCONNECT_UAQ_8.4_QR40.1_MY18-21 work on my radio? (My Radio does currently have NAV)
Thanks again!
Possible to send me the UCQ update as well? I have a 2018 Canadian Ram with the 8.4.UCQ is the Canadian version of the UAQ (American). If your truck was sold for the Canadian market and you are in Canada you'll want the UCQ version. I think I have it if you need it, just PM me.