Debadging help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

atticusfaul

Senior Member
Joined
Jun 18, 2012
Posts
338
Reaction score
48
Location
Boise
Ram Year
2005
Engine
4.7
Finished debadging and have slight swirls in the paint where I didn't use soft enough cloth with rubbing compound (turtle wax brand). It's hardly noticeable but is driving me absolutely crazy... Suggestions please!!!

Sent from my iPad using Tapatalk HD
 

quietpeen

Senior Member
Supporting Member
Joined
Jul 14, 2010
Posts
25,443
Reaction score
3,908
Ram Year
2021 TRX
Engine
Hellcat
Maybe try a swirl remover product?
 

BigDogg795

Senior Member
Joined
Sep 11, 2011
Posts
619
Reaction score
82
Location
Ronkonkoma, NY
Ram Year
2014
Engine
Hemi 5.7
I had the same thing; I used clay followed by polish then finishing up with wax. Looks like they were never there.
 
OP
OP
atticusfaul

atticusfaul

Senior Member
Joined
Jun 18, 2012
Posts
338
Reaction score
48
Location
Boise
Ram Year
2005
Engine
4.7
I had the same thing; I used clay followed by polish then finishing up with wax. Looks like they were never there.

Thanks... Any reccomendations on brand? Just want stuff done right!


Sent from my iPad using Tapatalk HD
 

Birddog

Senior Member
Joined
Sep 1, 2012
Posts
2,472
Reaction score
894
Location
West Palm Beach, FL
Ram Year
2016 Bright White 3500 Laramie 4X4 Long Bed
Engine
6.7 Cummins TD, 3.73
Go to an auto paint store and ask them for "ebony". Compound is very abrasive because it's meant to break down oxidation and imperfections. Ebony is a much less abrasive product that will bring you luster back. After you use the ebony don't forget to put a coat of wax back on the paint. Ebony is not a wax. Ebony can be rubbed in by hand as well.
 
OP
OP
atticusfaul

atticusfaul

Senior Member
Joined
Jun 18, 2012
Posts
338
Reaction score
48
Location
Boise
Ram Year
2005
Engine
4.7
Still have slight ghosting at certain angles... Any way to get rid of it or am I SOL?


Sent from my iPad using Tapatalk HD
 

quietpeen

Senior Member
Supporting Member
Joined
Jul 14, 2010
Posts
25,443
Reaction score
3,908
Ram Year
2021 TRX
Engine
Hellcat
Still have slight ghosting at certain angles... Any way to get rid of it or am I SOL?


Sent from my iPad using Tapatalk HD

it will eventually go away
 

redram2007

Senior Member
Joined
Sep 29, 2012
Posts
1,092
Reaction score
60
Location
Colorado Springs (Ft Carson)
Ram Year
2007
Engine
4.7
Not trying to jump in the middle of this thread but what is the easiest way to debadge? I just want to take a few off and tried to get my fingernail under them but they are on there pretty good.
 
OP
OP
atticusfaul

atticusfaul

Senior Member
Joined
Jun 18, 2012
Posts
338
Reaction score
48
Location
Boise
Ram Year
2005
Engine
4.7
Even after ebony?

Yep... I guess I'll just give it some time for now and give it a shot when I give it the deep clean before winter.


Sent from my iPad using Tapatalk HD
 
Top