Kraftei
Member
I just pulled onto my street (2016 Ram), maybe doing 10 klicks, suddenly the truck bogged out and stalled. Got it to restart (barely) and limped it home. Long story short, ran like sht and throwing tons of codes. After of a day of trying to diagnose, gave up and had it towed to the shop. Thought maybe the computer bit the dust.
Turns out: the tip of the valve broke off and then the valve did a little dance on the piston until it bent over. No idea why, possibly a defective valve? The engine was stock (never opened) other then the blower. Needed a new head as the seat was badly damaged, the head shop recommended replacing the head as there was risk of a new seat falling out. Turned out the head was cheap. That was all that was cheap. The piston was ok, just cleaned it up. Since it was apart I upgraded to these parts.
Turns out: the tip of the valve broke off and then the valve did a little dance on the piston until it bent over. No idea why, possibly a defective valve? The engine was stock (never opened) other then the blower. Needed a new head as the seat was badly damaged, the head shop recommended replacing the head as there was risk of a new seat falling out. Turned out the head was cheap. That was all that was cheap. The piston was ok, just cleaned it up. Since it was apart I upgraded to these parts.
- Comp Cams Stage 2 HRT
- Competition Valve Job
- Phaser Lock Out kit
- MDS Block Off Plugs
- PSI Spring Kit
- Non MDS Lifters