Lionfish
Junior Member
So, I bought a new 2018 2500 Tradesman Cummins 6.7L with only 25 miles on it, couldn't turn down the 14K they took off MSRP. The one thing I miss is the electric seats that my 2006 2500 had and a few other things, but lets talk about seats.
I figure it's possible to purchase either used, or a new set of electric seats, or at least a drivers seat, but thought I would check here to see if anyone has experience doing this type of job. A few questions:
1. Is the wiring perhaps in place, or at least enough that I am not rewiring the whole thing.
2. Can you do only the drivers seat, or maybe driver and passenger seat, or do you have to replace the whole 40/20/40 bench seat?
Any experience out there that you would car to share?
Thanks!
I figure it's possible to purchase either used, or a new set of electric seats, or at least a drivers seat, but thought I would check here to see if anyone has experience doing this type of job. A few questions:
1. Is the wiring perhaps in place, or at least enough that I am not rewiring the whole thing.
2. Can you do only the drivers seat, or maybe driver and passenger seat, or do you have to replace the whole 40/20/40 bench seat?
Any experience out there that you would car to share?
Thanks!