First post! Grabber ATx and bilstein.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

nd_012

Junior Member
Joined
Jul 24, 2017
Posts
6
Reaction score
18
Ram Year
2015
Engine
Hemi 5.7
First off this a wonderful board, extremely friendly and informative. I purchased a 2015 sport crew 4x4 last fall, all stock.

I have done new z36 rotors and pads all around, had bad vibration and rotor warpage at 30k. New brakes are simply amazing, highly recommend.

Bilstein 5100 set at 2.1, ride improved as most of you know, so smooth!

HID 5000k headlights from a vendor on here, forgetting at the moment, but spectacular performance out of them.

Exhaust I went with 18" magnaflow bolt in replacement. 8/10. Great sound, quiet when it needs to be. -2 for drone at 1600rpm, manageable until full cutback goes on down the road.

Wheels are raceline injector 931b 20x9 0 offset. Very happy with the look, few scratches from vendor, working on solution now.

Chose the general atx tire and so far liver them. Needed a 365 tire for literally all NY terrain, snow, ice, highway. 275 65 20 34" filled the gap quite nicely and barely can tell ride is firmer. Ran 40 psi stock with wranglers, 50 psi with e rated. Can't get over the smooth effortless ride. 3.21 gearing with 5.7, it's no more effort to drive what so ever. Can't wait to evaluate the 3 peak snow flake rating as well. May plasti dip the wheels for winter as they will be in year round. Any suggestions let me know, as an engineer the anodize doesn't seem to be enough protection given our harsh winters and salted roads.

Glad to be a part of this forum. Will get more pictures, this does not do it justice. Stance and overall aesthetic and performance is so fantastic. 20180524_204020.jpg
 

S0CAL

US Marine Veteran
Supporting Member
Military
Joined
Feb 3, 2016
Posts
3,207
Reaction score
3,521
Location
The Lonestar State
Ram Year
2021 Limited Longhorn CTD HO DRW 4x4
Engine
Cummins 6.7L HO
Sweet ride. Welcome to the forums!
 

JB1

Senior Member
TOTM Winner
Joined
Nov 3, 2011
Posts
8,366
Reaction score
7,529
Location
Houston, Texas
Ram Year
2017
Engine
Hemi 5.7
welcome to RF, truck looks good
 

micbegls1

Senior Member
Joined
May 22, 2018
Posts
140
Reaction score
110
Location
North NJ
Ram Year
2018
Engine
5.7 Hemi
Truck looks great nd, how bout some more pics ?!
 

R.L.K.

Senior Member
Supporting Member
Joined
Dec 1, 2013
Posts
12,803
Reaction score
12,501
Location
Bristol , Tn.
Ram Year
2014 4X4 QC Express 6 speed auto 355 differentials
Engine
5.7 Hemi
Welcome to the forum Sir from NE Tennessee!

Nice truck [emoji106][emoji106]

Sent from my SM-G930V using Tapatalk
 

BiGMERF

Senior Member
Joined
May 9, 2017
Posts
1,738
Reaction score
793
Location
Florida
Ram Year
2017 SLT 4x4
Engine
v6
Welcome !! Looking good


Sent from my iPhone using Tapatalk
 

Ravjay12

Senior Member
Joined
Jun 25, 2017
Posts
523
Reaction score
243
Ram Year
2012
Engine
Hemi 5.7
Wow, wow, wow! What a great first post! Welcome!
 
OP
OP
N

nd_012

Junior Member
Joined
Jul 24, 2017
Posts
6
Reaction score
18
Ram Year
2015
Engine
Hemi 5.7
Apologies for spelling above, cell phone is not ideal but had to share and give back to those helping me make those critical modification decisions! Overall I am very satisfied, ride is very quiet, smooth, tight and refined. Exhaust wakes up an otherwise quiet truck. Hids light up everything, need to
re-aim down a bit. Brakes are silent and very powerful. Thinking about 20% tint all around... in NY... may also swap sub and speakers with jl w6 or w7 and new mid and tweeters all around. Looking forward to adding to the wealth of knowledge of the board! Thanks to all those who did not even know they helped me out!

Got some angles this evening. Stock wheels were 20x9 at +18, these are 20x9 275 65 20 as mentioned at 0, so about 3/4" pushed out. Need some rubber mud flaps for stones out my way asap.

Any questions please ask guys/gals!
20180530_194414.jpg 20180530_194414.jpg 20180530_194428.jpg 20180530_194436.jpg 20180530_194456.jpg 20180530_194507.jpg
 

2010 Infantry Vet

Senior Member
Military
Joined
Jan 8, 2018
Posts
3,550
Reaction score
1,932
Location
Butler pennsylvania
Ram Year
2010
Engine
5.7
Apologies for spelling above, cell phone is not ideal but had to share and give back to those helping me make those critical modification decisions! Overall I am very satisfied, ride is very quiet, smooth, tight and refined. Exhaust wakes up an otherwise quiet truck. Hids light up everything, need to
re-aim down a bit. Brakes are silent and very powerful. Thinking about 20% tint all around... in NY... may also swap sub and speakers with jl w6 or w7 and new mid and tweeters all around. Looking forward to adding to the wealth of knowledge of the board! Thanks to all those who did not even know they helped me out!

Got some angles this evening. Stock wheels were 20x9 at +18, these are 20x9 275 65 20 as mentioned at 0, so about 3/4" pushed out. Need some rubber mud flaps for stones out my way asap.

Any questions please ask guys/gals!
View attachment 129701 View attachment 129701 View attachment 129702 View attachment 129703 View attachment 129704 View attachment 129705

Welcome, Truck looks good. Swapping out those chrome grill vents for the stock honeycomb would compliment it very nicely. I live in PA, and highly reccomend a good undercoating. My truck is a 2010 and i just wirewheeled off all of the rust underneath and sprayed it with rustoleum truck bedliner
 

jdavila99999

Senior Member
Joined
Aug 31, 2017
Posts
310
Reaction score
83
Ram Year
2016
Engine
Hemi 5.7
Oh yeah!


Sent from my iPhone using Tapatalk
 

RoverDon

Junior Member
Joined
Jan 31, 2018
Posts
2
Reaction score
1
Location
Rumson, NJ
Ram Year
2011
Engine
5.7
Hi - we are looking at getting new tires for our 2011 Ram and looking at the General AT/X's as they have a 3 peak snowflake and this vehicle will see snow use.

Thanks for the pictures - the tires look great! Any updates on how these General tires are working for you? Thanks!
 

ilovemyramlaremie

Senior Member
Joined
Mar 19, 2018
Posts
789
Reaction score
800
Location
Moravia NY
Ram Year
2020
Engine
5.7 hemi
2F0F778C-22DB-4AC5-A9B0-626BFE4AB1AB.png A81175AF-CCE1-4E27-8EAF-AC19EDD844B4.jpeg 9E6128A1-3C34-46FF-9CD8-078181721851.jpeg Welcome from one other NY resident to the forum!! Nice looking truck! And yes, I do too like those general ATx tires, they ride and feel so smooth, and handle great.
 

BrewCrew

Senior Member
Joined
Feb 28, 2019
Posts
189
Reaction score
209
Location
Lake Arrowhead
Ram Year
2016
Engine
HEMI 5.7L
I just started running the ATX's as well and I love them! Do you have a PSI recommendation? I am running mine at 47PSI right now.

Awesome truck man!!
 

Latest posts

Forum statistics

Threads
195,887
Posts
2,875,448
Members
156,866
Latest member
Culmer
Top