Cesar569,
I thought for a few minutes that I might have one of these for you. I have the door harnesses out of a 2014 1500 that I stripped a few circuits out of like the ambient lighting circuit, keyless etc. But the wires going to the door master switch for the windows/locks/mirrors uses a two connector system in the 14 and 15's, rather than this one large connector. So the door harness I have won't work.
That being said, a LOT of these different connectors appear all over the truck in various places. I have parts/all of several body harnesses, door harnesses, instrument panel harnesses, engine harnesses and others as well. If you can find this connector on a harness for a 2014 or a 2015, odds are I have it and don't need it.
The connectors are made by YESC or YESC/KAIZEN(?spelling?) and the pins are all common, 0.64, 1.5, 2.8 and 6.3mm. I just bought 100 each of the 0.64 male and female and a 100 each of the 1.5 male and female. I didn't get any 2.8mm as I haven't needed any and likely won't for what I am doing in my truck. I certainly don't need a 100 of each but that was the minimum buy for them, so I planned on selling the leftovers when I'm done.
So you can get the 0.64mm female pins for the connector from me, and if you can find that same connector on some 2014/15 harness and can describe which harness and where on the harness it is or send me a pick or tell me it is for and then I could look thru the 2 large black bags of extra wiring I have and cut it out for you.