Installed LED Pods in Factory Fog Position

[99RamSport360]

I recently finally got the chance to do some lighting updates to my truck. I installed a 22" spot/flood combo lightbar onto my bullbar and then two 18w LED cube lights into the factory fog holes and used the factory wiring for the cubes. Took about an hour in my machine shop for the total install. All the lights were purchased from truxtech.com.

 

[99RamSport360]

Oh and I suppose I never posted my new wheels and tires. KX Offroad 18x10's and Patagonia AT 33/12.5/R18

 

[dodge dude94]

Looking good. Hows the output?

 

[99RamSport360]

Compared to stock headlights and my 120w Hella 500's, the output is unreal. The 22" bar is great. Lights up both ditches and pretty far ahead of the truck. The fogs are a flood pattern so anything within 50 yards of the truck gets lit up. However, if you have the lightbar on, turning on the fogs makes no difference, but they're great for on-road use however I don't advise it. Definitely my favorite purchase other than the wheels.

 

[96DodgeRam4x4]

mind posting how you wired the fogs? I really wanna put a cube in each fog hole but ill be honest, wiring isn't my thing and I have about 0 experience when it comes to aftermarket lighting. thanks man.

Also what size are your cubes.

 

[99RamSport360]

mind posting how you wired the fogs? I really wanna put a cube in each fog hole but ill be honest, wiring isn't my thing and I have about 0 experience when it comes to aftermarket lighting. thanks man.

Also what size are your cubes.

I simply cut the factory plug off of the factory wiring harness and soldered the positive of the harness to the positive of the cube and same with the ground. Pretty simple install. And they are a 3x3 pod from truxtech.com

 

[99RamSport360]

 

[99RamSport360]

It's a basic bracket built from a piece of angle iron and piece of 3/8" strap with two holes drilled. Then attached to the bumper horn in a factory drilled hole using a large bolt, lock washer and a nut. Pretty simple just takes time to test fit.