JGBimle
Senior Member
- Joined
- May 5, 2014
- Posts
- 369
- Reaction score
- 136
- Ram Year
- 2014
- Engine
- Hemi 5.7
I have some stuff up for sale and I explain the reason under each item. All prices are +shipping
First is a set of LED fog lights, brackets, pigtails, and both amber and clear lenses. 2 fog and 2 spot. I have a 2015 and they would not work by just plugging them into the factory wiring and I did not want to run a relay. All parts are Altered Off-Road. Made in Canada.
$200
Next is a 42" LED light bar. It is curved, combo beam. It is an eBay lightbar with CREE LEDs and the 4D optic lenses (convex). The bar got condensation behind the lens so I pulled it apart and dried it out as well as lined it with white LED strips to give it a backlit glow while it is off. The bar was mounted in my lower bumper opening so it shows signs of wear from that. I resealed it with black RTV silicone. There are two pigtails, one for the light bar and one for the backlighting. I'll supply the connectors for these as well as a three position switch so you can have the backlighting and light bar on one switch. I had planned on putting the lightbar behind my mesh grille but it's too long.
$300
These are 3/16" thick stainless mounts I made for 42" lightbars in the sport/express bumpers. I took my lightbar off because it was too much chrome on my all black truck.
$25 or $30 if you want me to clean them up and paint them. SOLD
This is a complete set of chrome emblems. I took them off because I put black ones all around.
$40 for the whole set or if you're looking for single emblems I'll split them up
Honeycomb grill inserts and parts. These came off because I put a mesh grill on my truck.
$100 or best offer. Honestly I have no idea how much these usually go for
MBRP 2.5" inlet, 3.5" outlet, 12" long double walled tips. I took these off and put on 5" tips. I burned the tips with a torch.
$40 for the pair
First is a set of LED fog lights, brackets, pigtails, and both amber and clear lenses. 2 fog and 2 spot. I have a 2015 and they would not work by just plugging them into the factory wiring and I did not want to run a relay. All parts are Altered Off-Road. Made in Canada.
$200
Next is a 42" LED light bar. It is curved, combo beam. It is an eBay lightbar with CREE LEDs and the 4D optic lenses (convex). The bar got condensation behind the lens so I pulled it apart and dried it out as well as lined it with white LED strips to give it a backlit glow while it is off. The bar was mounted in my lower bumper opening so it shows signs of wear from that. I resealed it with black RTV silicone. There are two pigtails, one for the light bar and one for the backlighting. I'll supply the connectors for these as well as a three position switch so you can have the backlighting and light bar on one switch. I had planned on putting the lightbar behind my mesh grille but it's too long.
$300
These are 3/16" thick stainless mounts I made for 42" lightbars in the sport/express bumpers. I took my lightbar off because it was too much chrome on my all black truck.
$25 or $30 if you want me to clean them up and paint them. SOLD
This is a complete set of chrome emblems. I took them off because I put black ones all around.
$40 for the whole set or if you're looking for single emblems I'll split them up
Honeycomb grill inserts and parts. These came off because I put a mesh grill on my truck.
$100 or best offer. Honestly I have no idea how much these usually go for
MBRP 2.5" inlet, 3.5" outlet, 12" long double walled tips. I took these off and put on 5" tips. I burned the tips with a torch.
$40 for the pair
Last edited:
