Yoox_II
Senior Member
- Joined
- May 26, 2013
- Posts
- 300
- Reaction score
- 26
- Ram Year
- 1984
- Engine
- 5.7L Hemi
I'm going to be replacing my rear brakes this week. Drums, shoes, hardware, and backing plates .I understand that I need to take the axles out to replace the backing plates. Is there any additional parts I should have ready? Do the axle seals get disturbed during the tear down? Any other special hardware that might be siezed and break? Will I lose much fluid when I remove the axles?
Thanks in advance
Thanks in advance