Jake1174
Junior Member
Hoping someone can shed light on this.
Removed the cylinder head and had it reconditioned at a machine shop. Ever since there is a slight gap between the rocker and the valvestem on the intake side only. The lifters are not collapsed and the pushrods are stock. Is it possible that machining the head caused some valvetrain geometry issue?
Thanks!
Removed the cylinder head and had it reconditioned at a machine shop. Ever since there is a slight gap between the rocker and the valvestem on the intake side only. The lifters are not collapsed and the pushrods are stock. Is it possible that machining the head caused some valvetrain geometry issue?
Thanks!