silver_five7
Junior Member
I have a 2 piece front bumper, and i'm curious if the sport bumper (1 piece) is an exact fit on my Tradesman. if not, how hard is it to get to fit correctly? couldn't find any pictures or methods. thanks.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
what's an AirDam? where did you find them for $250?I think if you have the chrome SLT bumper the brackets are already there because of the weight of the chrome bumper.
I am looking to do this as well and found a Sport bumper and the AirDam for about $250 shipped. If I don’t need brackets I’m pulling the trigger
2009 QCRB 4WD - 4.56/Shorties/FMTB/Intake/Exhaust/6” on 35’s/lots more [emoji41]
Sent from my iPhone using Tapatalk Pro
thank you SO much. it was a huge pain in the ass looking for this information. would i be able to take the impact bar, energy absorber, closure panel, and center support from another truck? (maybe one that got totaled in the back?)I have done my homework on this for my 17 Ram Tradesman. Here are the parts needed and a link to where I found the best prices. Also keep in mind that these are all factory Mopar parts not the cheaper aftermarket.
#1 68197698AA BUMPER COVER W/O SENSORS $256.15
#6 68104942AD CENTER SUPPORT $30.71
#9 68196999AB IMPACT BAR $270.32
#10 68145441AC ENERGY ABSORBER $144.10
#13 68207015AA CLOSURE PANEL $21.97
This does not included the necessary hardware to complete the install. Fog lights from the two piece bumper with work ok with the new one piece bumper.
Good luck with your bumper upgrade!
https://www.moparwholesaleparts.com...ine/body-cat/bumper-and-components-front-scat
View attachment 144660
thank you SO much. it was a huge pain in the ass looking for this information. would i be able to take the impact bar, energy absorber, closure panel, and center support from another truck? (maybe one that got totaled in the back?)
See I though the chrome front two piece already had all those supports and pieces because of how heavy it is.
I was going sport for weight savings and then adding the led bar in the lower section.
If I have to add a bunch of extra pieces then yeah it’s not worth it.
2009 QCRB 4WD - 4.56/Shorties/FMTB/Intake/Exhaust/6” on 35’s/lots more [emoji41]
Sent from my iPhone using Tapatalk Pro
I have done my homework on this for my 17 Ram Tradesman. Here are the parts needed and a link to where I found the best prices. Also keep in mind that these are all factory Mopar parts not the cheaper aftermarket.
#1 68197698AA BUMPER COVER W/O SENSORS $256.15
#6 68104942AD CENTER SUPPORT $30.71
#9 68196999AB IMPACT BAR $270.32
#10 68145441AC ENERGY ABSORBER $144.10
#13 68207015AA CLOSURE PANEL $21.97
This does not included the necessary hardware to complete the install. Fog lights from the two piece bumper with work ok with the new one piece bumper.
Good luck with your bumper upgrade!
https://www.moparwholesaleparts.com...ine/body-cat/bumper-and-components-front-scat
View attachment 144660
Also can someone with a sport front bumper get a shot of how it looks underneath with the crash bar connected then the big plastic piece the bumper connects to please. I want to have enough pics to do it right and quick and I will try to video me doing it as well so other can see what needs to be done.