specs on Alignment with rear adjustable control arms

[Dilligaf-23]

I put a 2/4 drop and core 4x4 adjustable rear control arms. stock 22" wheels. Keep having troubles of where it needs to be adjusted to. Does anyone have alignment specs for this setup?

 

[Bigskyroadglide]

My suggestion is to start at stock length for upper and lower. Check you pinion angle to see how far its out then develop your plan for adjustment.

I don't think the lowers are long enough to Center the rear wheels and if they are you uppers will run out of adjusting for pinion angle

That's why a lot of lowered rams run the Inez brackets.

 

[DILLIGAF]

All you need is an angle finder, Find your output shaft angle and adjust your bars and match it to the rear diff .
Check that your axle is still centered in the frame and adjust Panhard bar accordingly